Panasonic DMC FP8K Digital Still Camera - Advanced Features - Page 99
[I.EXPOSURE], [MIN. SHTR SPEED], Minimum shutter speed setting
UPC - 037988263592
View all Panasonic DMC FP8K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Advanced (Recording pictures) [I.EXPOSURE] For details on [REC] Mode menu settings, refer to P21. Contrast and exposure will be adjusted automatically when there is a big difference in brightness between the background and subject, to bring the image close to real life. Applicable modes: ·n [OFF]/[ON] Note • When [ON] is set, [ ] is displayed on the screen. • Even when the [SENSITIVITY] is set to [ISO80]/[ISO100], [SENSITIVITY] may be set higher than [ISO80]/[ISO100] if the picture is taken with [I.EXPOSURE] set to valid. • Compensation effect may not be achieved depending on the conditions. • [ ] in the screen turns to yellow when [I.EXPOSURE] is in effect. [MIN. SHTR SPEED] For details on [REC] Mode menu settings, refer to P21. You can take bright pictures in dark places by setting [MIN. SHTR SPEED] slower. Also, you can set it faster to reduce the blur of the subject. Applicable modes: · [1/125], [1/60], [1/30], [1/15], [1/8], [1/4], [1/2], [1] Minimum shutter speed setting Brightness Jitter 1/125 Darker Less 1 Brighter More Note • This should usually be set to [1/4 ] to take pictures. (When you select a minimum shutter speed other than [1/4 ], [ ] appears on the screen.) • Setting [MIN. SHTR SPEED] to slower speed might increase the chance of jitter, so we recommend using a tripod and the self-timer for taking pictures. • Setting [MIN. SHTR SPEED] to faster speed might make the picture darker, so we recommend recording the picture in well-lit area. If correct exposure cannot be achieved, [ ] will flash in red when the shutter button is pressed halfway. • The setting is not available when [INTELLIGENT ISO] is being used. - 99 -