Panasonic EW3002W EW3002 User Guide - Page 5

Name and Function of Each Product Part Fig. 1 Battery cover R P/min. mmDHgIA. mmSHYgS. SOtanrt/Off Pressure cuff Display Recall button SYS. mmH DIA. mmH P/min. R Start (On/Off) button On/Off Start Hard carrying case (Can be used as an armrest) 7 Inserting/Replacing Batteries 1. Grasp the battery cover and remove it to the left as shown in Fig. 2-a. 2. Insert two 1.5 V alkaline (AAA/LR03) batteries, observing the (+) and (-) signs to ensure correct polarity. 3. Close the battery cover until it clicks into place (Fig. 2-b). • Approximately 500 measurements can be taken with a new set of Panasonic alkaline batteries (at an ambient temperature of 22°C (71.6°F), pressurization of 180 mmH ). Fig. 2-a 2 Fig. 2-b mSmYHSg. mDmIHAg. P/min. R OStn/artOff mSmYHSg. mDmIHAg. P/min. R OStn/artOff 3 PRECISE LOGIC™ 1 PRECISE LOGIC™ Notes: • Do not mix old and new batteries. • The batteries' power output is impaired at low temperatures. • The performance of the batteries included with the product may be affected somewhat according to factors such as the amount of time past since the date of manufacture. When to Change Batteries Change the batteries when the battery symbol (Fig. 3) appears on the display or when no data is displayed even when the On/Off button is pressed. CAUTION: Do not throw batteries into a fire. Doing so may result in an accident or explosion. Fig. 3 SYS. mmH DIA. mmH P/min. R On/Off Start 8