Panasonic FV-08VQC5 Installation Instructions - Page 5

Humidity preset switch Timer preset switch ~M80A%X ~8M0A%X MIN ~30% MIN ~30% Humidity preset switch positions (Tolerance:±10%) MIN ~MAX ~30% ~ 40% ~50% ~60% ~70% ~ 80% Factory setting:~50% RH ("~" means "about") Timer preset switch positions Timer Position : refer to 0.5 minute Panasonic ventilating fan responds to: (1) Motion sensor detectible condition. (2) Humidity sensor detectible condition. Motion sensor detectible condition The delay time is determined by timer preset switch. The unit continues running for an adjustable duration of 0.5 to 60 minutes, after motion is no longer detected. Human activity Fan activity Stop Room temperature is 25 (77 F). Remains running until the delay time has passed Humidity sensor detectible condition (a) rapid to moderate humidity increases and (b) humidity above a 30% 8~0% relative humidity set-point. (a) and (b) are set with "HUMIDITY SETTING" adjustment. Fan may occasionally turn on when environmental conditions change. The "TIMER" controls how long the fan remains on (a) after rise in humidity and (b) humidity level is below the set-point decreasing about 5%RH. 1. If this unit is to be install over a tub or shower, for best results, locate it near the shower head. 2. Long-time operation will influence the detecting precision as dust accumulates. Humidity preset switch may need to be adjusted.