Panasonic HC-V380 Basic Operating Manual - Page 30

Using [Link to Cell] with a direct connection Setting up a direct connection between this unit and the smartphone when [Direct Connection Password] is set to [OFF] 1 Press Wi-Fi button on this unit and touch [Wi-Fi 2/2 Setup]. 2 Touch [Direct Connection]. ≥ This unit will go into connection standby with the smartphone. ≥ The SSID of this unit is displayed on the screen of this unit. 3 Turn on the Wi-Fi function in the smartphone's setup menu. A [Wi-Fi Setup] B [EXIT] 4 On the smartphone's Wi-Fi setting screen, select the SSID displayed on this unit. ≥ It may take time to complete the Wi-Fi connection. Wi-Fi 5 When the Wi-Fi connection is complete, press the home button on the smartphone and start up the smartphone application "Image App". 6 (If this is the first time the smartphone is connecting to this unit) Confirm the message "Connect this smartphone?", and touch [YES] on the screen of this unit. ≥ When the connection to this unit is complete, the image from this unit is displayed on the smartphone screen. Control this unit remotely with the smartphone.  C [Device Name] D [YES] E Message ≥ Transmission speed may decrease, or may not be usable depending on the environment it is used in. ≥ For details on how to set up a connection with [Direct Connection Password] set to [ON], refer to the Owner's Manual (PDF format). ≥ If you cannot connect this unit and the smartphone, refer to the following: j Make sure the smartphone is not connected to the wireless access point. If it is connected to the wireless access point, change the Wi-Fi access point using the smartphone's Wi-Fi set up. ≥ Please refer to the operating instruction of the device in use for details about the setting of the wireless access point or smartphone. 30 SQT1139 (ENG)