Panasonic HDC-HS80K HDCHS80 User Guide - Page 108
Dubbing through operations on the Blu-ray disc recorder or high
View all Panasonic HDC-HS80K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
4 Dubbing through operations on the Blu-ray disc recorder or high- definition (AVCHD) compatible DVD recorder. ≥ / Do not touch [CHANGE MEDIA] on the screen of the unit during dubbing. About the screen indication of the unit ≥ When the unit is accessing the SD card, card access icon ( ) appears on the unit screen or the access lamp is on. ≥ When the unit is accessing the built-in memory, built-in memory access icon ( ) appears on the unit screen or the access lamp is on. ≥ When the unit is accessing the HDD, HDD access icon ( ) appears on the unit screen or the HDD access lamp is on. ≥ Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is accessing the media, as this may result in the loss of recorded content. ≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.) ≥ When this unit is connected to a Panasonic Blu-ray disc recorder or a DVD recorder using a USB cable while the unit is turned on, power is also supplied from the connected equipment to this unit. ≥ For details on dubbing and playback methods, read the operating instructions of the Blu-ray disc recorder or DVD recorder. ≥ When you connect the unit to a Blu-ray disc recorder, a dubbing operations screen may appear on the television connected to the Blu-ray disc recorder. In this case as well, perform the operations of steps 1 to 4. ≥ You cannot change the mode of the unit or turn off the unit while it is connected to a Blu-ray disc recorder or DVD recorder. Disconnect the USB cable before performing either of these operations. ≥ If the battery runs down during dubbing, a message will appear. Operate the Blu-ray disc recorder to cancel the dubbing. 108 VQT3J15