Panasonic HDC-SD40 Owners Manual - Page 42
Quick Start], Alert Sound]
View all Panasonic HDC-SD40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
[QUICK START] [OFF]/[ON] This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened. ≥ When in Quick start standby mode about 60% of the power used in Recording pause mode is being consumed, so the recording time will be reduced. ≥ Quick start will not work if there is no SD card inserted. ≥ / Quick start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there is no SD card inserted. ≥ Change the mode to . 1 Set [QUICK START] to [ON]. 2 Close the LCD monitor while the mode is set to . The status indicator A flashes green and the unit goes into Quick start standby mode. 3 Open the LCD monitor. The status indicator A lights red and the unit is put into recording pause. ≥ Quick Start Standby Mode is canceled if j about 5 minutes have elapsed j mode is set to ≥ It may take some time for Automatic white balance to adjust. ≥ In the Quick Start Mode, the zoom magnification becomes 1k. ≥ If [ECONOMY] (l 41) is set to [5 MINUTES] and the unit automatically goes into Quick Start Standby Mode, close the LCD monitor and then open it again. ≥ Turn the unit off using the power button. [ALERT SOUND] [OFF]/ / Starting and stopping of recording and unit on/off can be confirmed with this sound. (Volume low)/ (Volume high) 2 Beeps for 4 times When an error occurs. Check the sentence displayed on the screen. (l 101) 42 VQT3J95