Panasonic HDC-TM20R Hd Video Camera - Page 66
Relay recording, Select the menu., Auto Ground, Directional Standby, Auto slow shutter
UPC - 037988983926
View all Panasonic HDC-TM20R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Function Relay recording Auto GroundDirectional Standby (AGS) Effect/Setting method It is possible to continuously record motion picture to an SD card when there is no space available in the built-in memory. ≥ Change the mode to . Select the menu. (l 34) [RECORD SETUP] # [RELAY REC] # [ON] ≥ is displayed on the screen. will disappear when space in the built-in memory is gone and the recording to the SD card starts. ≥ It allows you to record only to SD card from built-in memory. ≥ Relay recording can only be performed once. ≥ Combine the scenes that were relay recorded using the [RELAY SCENE COMBINE] into the SD card. (l 96) ≥ Once the relay recorded scene and the scene that was recorded on the SD card after that are combined into the SD card using the [RELAY SCENE COMBINE], it will be possible to perform the relay recording again. ≥ If the [RELAY REC] is set to [ON] without performing the [RELAY SCENE COMBINE], a message is displayed. You will be able to perform relay recording by touching [YES], but you will not be able to perform the [RELAY SCENE COMBINE] after that. If the unit continues to be tilted upside down from the normal horizontal position while recording motion pictures, it is automatically put into recording pause. ≥ Change the mode to . Select the menu. (l 34) [RECORD SETUP] # [AGS] # [ON] Auto slow shutter You can record bright pictures even in dark places by slowing the shutter speed. ≥ Change the mode to . ≥ The Intelligent auto mode is set to off. (l 46) Select the menu. (l 34) [RECORD SETUP] # [AUTO SLOW SHTR] # [ON] ≥ The shutter speed is set to 1/30 or more depending on the surrounding brightness. 66 VQT1Y00