Panasonic HDC-TM80S HDCHS80 User Guide - Page 44
ECONOMY], QUICK POWER ON], QUICK START], Close the LCD monitor while the mode is, set
View all Panasonic HDC-TM80S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
[ECONOMY] [OFF]/[5 MINUTES] When about 5 minutes have passed without any operation, this unit automatically turns off to save battery life. ≥ The Power Save function will not activate when: j connected to AC adaptor j using the USB cable for PC, DVD burner etc. j PRE-REC is used [QUICK POWER ON] [OFF]/[ON] The unit is put into recording pause approx. 1 second when the unit is turned on with the mode set to or . ≥ Depending on the recording conditions, start time may be longer than 1 second. ≥ In the Quick power on mode, the zoom magnification becomes 1k. [QUICK START] [OFF]/[ON] This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened. ≥ When in Quick start standby mode about 80% of the power used in Recording pause mode is being consumed, so the recording time will be reduced. ≥ Quick start will not work if there is no SD card inserted. ≥ / Quick start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there is no SD card inserted. ≥ Change the mode to or . 1 Set [QUICK START] to [ON]. 2 Close the LCD monitor while the mode is set to or . The status indicator A flashes green and the unit goes into Quick start standby mode. 3 Open the LCD monitor. The status indicator A lights red and the unit is put into recording pause. ≥ Quick Start Standby Mode is canceled if j about 5 minutes have elapsed j mode is set to ≥ Depending on the recording conditions and menu settings, time for Quick start may be longer than 0.6 seconds. ≥ It may take some time for Automatic white balance to adjust. ≥ In the Quick Start Mode, the zoom magnification becomes 1k. 44 VQT3J15