Panasonic HDCSD100P Hd Video Camera - Multi Language - Page 70
Zoom operation, Manual focus adjustment, Zoom by rotating the ring., Select the menu.
View all Panasonic HDCSD100P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Zoom operation Zoom operation can be done using the multi manual ring. ≥ Move the AUTO/MANUAL switch from the MANUAL to FOCUS/ZOOM position, and display [ ]. (l 69) Zoom by rotating the ring. A side: Close-up recording (zoom in) A B side: Wide-angle recording (zoom out) ≥ The zoom speed varies depending on the B speed to rotate the ring. Manual focus adjustment ≥ Auto focus is on when [ ] is displayed. If auto focusing is difficult due to the conditions, then use manual focus. ≥ Move the AUTO/MANUAL switch from the MANUAL to FOCUS/ZOOM position, and display [MF]. (l 69) 1 (When MF assist function is used) ≥ Face detection framing is not displayed when Select the menu. (l 29) the display is enlarged even if [FACE FRAMING] is set to [ALL]. [ADVANCED] # [MF ASSIST] # [ON] ≥ This function's default setting is [ON]. ≥ The zebra pattern does not appear on the part of the screen that is enlarged when [ZEBRA] is [ON]. 2 Adjust the focus by rotating the ≥ Luminance display is not displayed when the display is enlarged even if [LUMINANCE] is set ring. to [ALWAYS]. ≥ Histogram is not displayed when the display is enlarged even if [HISTOGRAM] is set to [ALWAYS]. The center of the screen is enlarged. The normal screen returns approximately 2 seconds after you finish bringing the subject into focus. ≥ The center of the screen is not enlarged when [MF ASSIST] is [OFF]. ≥ To return to auto focus, move the AUTO/ MANUAL switch to FOCUS/ZOOM position and display [ ], or set to AUTO. ≥ MF assist does not work if the zoom magnification is more than 12k. ≥ The part of the screen that is enlarged is not enlarged on the image actually recorded. 70 VQT1T64