Panasonic HDCTM55 Hd Camcorder - Multi Language - Page 46
Quick Power On], Quick Start]
View all Panasonic HDCTM55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
[QUICK POWER ON] [OFF]/[ON] The unit is put into recording pause approx. 1 second when the power is turned on with the mode set to or . ≥ Depending on the recording conditions, start time may be longer than 1 second in Still Picture Recording Mode. ≥ In the Quick power on mode, the zoom magnification becomes 1k. [QUICK START] [OFF]/[ON] This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened. ≥ When in Quick start standby mode about 80% of the power used in Recording pause mode is being consumed, so the recording time will be reduced. ≥ Start time will not shorten if there is no SD card inserted. / Start time will be shortened if the [Built-inMemory] is selected in the [MEDIA SELECT], even if there is no SD card inserted. Start time will be shortened if the [HDD] is selected in the [MEDIA SELECT], even if there is no SD card inserted. ≥ Change the mode to or . 1 Set [QUICK START] to [ON]. 2 Close the LCD monitor while the mode is set to or . The status indicator A flashes green and the unit goes into Quick start standby mode. ≥ The lens cover does not close. 3 Open the LCD monitor. The status indicator A lights red and the unit is put into recording pause. ≥ Quick start standby mode is canceled if j about 5 minutes have elapsed j mode is set to ≥ Depending on the recording conditions, time for Quick Start may be more than 0.6 seconds slower in Still Picture Recording Mode. ≥ It may take some time for Automatic white balance to adjust. ≥ In the Quick Start Mode, the zoom magnification becomes 1k. ≥ If [ECONOMY] (l 45) is set to [5 MINUTES] and the unit automatically goes into Quick Start Standby Mode, close the LCD monitor and then open it again. ≥ Turn the unit off using the power button. 46 VQT2M51