Panasonic HDCTM700 HDCHS700 User Guide - Page 84
Manual shutter speed/iris adjustment, Touch [SHTR] or [IRIS]., Touch, to adjust settings.
View all Panasonic HDCTM700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Manual shutter speed/iris adjustment Shutter Speed: Adjust it when recording fast-moving subjects. Iris: Adjust it when the screen is too bright or too dark. ≥ Press the iA/MANUAL button or CAMERA FUNCTION button to switch to Manual Mode. (l 82) ≥ For how to perform the settings when using the viewfinder, refer to page 82 1 Touch [SHTR] or [IRIS]. 2 Touch / to adjust settings. SHTR Shutter speed: 1/60 to 1/8000 ≥ If [AUTO SLOW SHTR] is set to [ON], the shutter speed will be set between 1/30 and 1/8000. ≥ If [DIGITAL CINEMA] is set to [ON], the shutter speed will be set between 1/48 and 1/8000. (When [AUTO SLOW SHTR] is set to [ON], the range is 1/24 to 1/8000.) ≥ The shutter speed closer to 1/8000 is faster. ≥ The shutter speed will be set between 1/2 and 1/2000 in Still Picture Recording Mode. ≥ When setting both the shutter speed and the iris/gain value, set the shutter speed and then set the iris/gain value. Manual shutter speed adjustment ≥ When the shutter speed is set lower than 1/15 in the Still Picture Recording Mode, using a tripod is recommended. Also, white balance cannot be set. The shutter speed will be set to 1/30 when the power is turned on again or when the Quick start is performed. ≥ You may see a band of light around an object that is shining very bright, or highly reflective. ≥ During normal playback, image movement IRIS Iris/Gain value: CLOSE !# (F16 to F1.7) !# OPEN !# (0dB to 18dB) ≥ Value closer to [CLOSE] darkens the image. ≥ Value closer to [18dB] brightens the image. ≥ When the iris value is adjusted to brighter than [OPEN], it changes to the gain value. ≥ To return to auto setting, press the iA/ MANUAL button again. may not look smooth. ≥ If you record an extremely bright object or record under indoor lighting, color and screen brightness may change or a horizontal line may appear on the screen. In this case, record in the Intelligent Auto Mode or set the shutter speed to 1/60 in areas where the power supply frequency is 60 Hz, or 1/100 in areas of 50 Hz. Manual iris/gain adjustment ≥ Luminance level and histogram are displayed during the iris adjustment. (l 76, 77) ≥ If the gain value is increased, the noise on the screen increases. ≥ Depending on the zoom magnification, there are iris values that are not displayed. 84 VQT2M75