Panasonic HDCTM90 HDCSD90 User Guide - Page 42
QUICK POWER ON], QUICK START], Close the LCD monitor while the mode, is set to, Open the LCD monitor.
View all Panasonic HDCTM90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
[QUICK POWER ON] [OFF]/[ON] The unit is put into recording pause approx. 1 second when the unit is turned on with the mode set to or . ≥ Depending on the recording conditions, start time may be longer than 1 second. ≥ In the Quick power on mode, the zoom magnification becomes 1k. [QUICK START] [OFF]/[ON] This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened. ≥ When in Quick start standby mode about 80% of the power used in Recording pause mode is being consumed, so the recording time will be reduced. ≥ HDC-SD90 Quick start will not work if there is no SD card inserted. ≥ HDC-TM90 Quick start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there is no SD card inserted. ≥ Change the mode to or . 1 Set [QUICK START] to [ON]. 2 Close the LCD monitor while the mode is set to or . The status indicator A flashes green and the unit goes into Quick start standby mode. ≥ The lens cover does not close. 3 Open the LCD monitor. The status indicator A lights red and the unit is put into recording pause. ≥ Quick Start Standby Mode is canceled if: j about 5 minutes have elapsed j mode is set to ≥ Depending on the recording conditions and menu settings, time for Quick start may be longer than 0.6 seconds. ≥ It may take some time for Automatic white balance to adjust. ≥ In the Quick Start Mode, the zoom magnification becomes 1k. ≥ If [ECONOMY] (l 41) is set to [5 MINUTES] and the unit automatically goes into Quick Start Standby Mode, close the LCD monitor and then open it again. ≥ Turn the unit off using the power button. 42 VQT3J56