Panasonic HX-A1 HX-A1 Owner s Manual - Page 22
Attaching to the shoulder strap of a backpack, etc.
View all Panasonic HX-A1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
4 Fasten the Multi Mount securely by aligning the two fasteners to one another. ≥ Fasten securely to prevent the Multi Mount from falling off. ≥ Dust, etc. adhering to the hook and loop fastener will weaken the adhesion. Before attaching it, check if dust, lint, etc. is adhering. 5 Attach this unit to the Multi Mount as shown in the figure. (l 23) ≥ When removing the Multi Mount, do not pull the Multi Mount. Remove it by peeling off the hook and loop fastener from the edge. ≥ Do not peel off the double sided tape attached to the hook and loop fastener. Once the tape is peeled off, the adhesion weakens, making the tape unusable. ≥ When attaching the Multi Mount, check if the hook and loop fastener is fastened securely and the adhesion of the double sided tape has weakened. Attaching to the shoulder strap of a backpack, etc. ≥ Before attaching the Multi Mount, remove the hook and loop fastener from the Multi Mount. 1 Tuck a shoulder strap of a backpack or similar item between the Multi Mount and the band, and pass the band through the portion A to hold the Multi Mount in position. ≥ Before attaching the Multi Mount, check that the hook and loop fastener side of the band is facing up. ≥ Move the Multi Mount to the position where you want to attach it. 2 Pass the band through the ring B as shown in the figure. 3 Fold the band inwards as shown in the figure, and fasten it with the hook and loop fastener C of the band. 22 SQT0885 (ENG)