Panasonic JU-257A Service Guide - Page 21
Mb Fdu, Mitsumi D359c, Sa450, Sony Mpf520-3, Mitsumi D359t5
View all Panasonic JU-257A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Peripherals - Pocket Service Guide 1.44 MB FDU MITSUMI D359C SA450 There are no jumpers to be set on this drive and for this reason the drive does not have any. Density Mode and Drive Select are fixed and have already been set by Mitsumi as follows: • Density Mode = Auto Select • Drive Select = Drive 0 D359C drives are installed on systems where they cannot be fitted as second drives. 1.44 MB FDU SONY MPF520-3 JUMPERS POWER SUPPLY CONNECTOR DRIVE SELECT 1 (configuration to use) SA450 4 JUMPERS POWER SUPPLY CONNECTOR DRIVE SELECT 0 (Do not use) 1.44 MB FDU MITSUMI D359T5 SA450 There are no jumper settings to be made on this drive and consequently there are no jumpers present. The Density Mode and Drive Select parameters cannot be changed and are factory-set by Mitsumi as follows: • Density Mode = Auto Select • Drive Select = Drive 2. 3.5" MICRO FLOPPY DISK DRIVES 4-21