Panasonic KV-S1025C Scanner - Page 37
Removing the Stand, Removing the stand
UPC - 092281858029
View all Panasonic KV-S1025C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Removing the Stand The scanner can be used without the stand depending on the operating conditions. Follow the steps below to remove the stand from the scanner. Removing the stand 1 Place the scanner on an even surface as shown in the illustration, and then loosen the two screws counterclockwise. 2 Remove the stand from the scanner. Stand Note: • When installing the stand, carry out these steps in reverse order. 37
37
Removing the Stand
The scanner can be used without the stand depending on the operating conditions.
Follow the steps below to remove the stand from the scanner.
Removing the stand
1
Place the scanner on an even surface
as shown in the illustration, and then
loosen the two screws
counterclockwise.
2
Remove the stand from the scanner.
Note:
•
When installing the stand, carry out these steps in reverse order.
Stand