Panasonic KX-TA30830 KXTA308 User Guide - Page 152

P 3.2 Telephone Features Paralleled Telephone Connection Any extension can be connected in parallel with a proprietary telephone and a single line telephone. In the event of a power failure, CO1 can be accessed using the single line telephone that is connected in parallel with the proprietary telephone to jack number 01. If the extension receives a call, ringing will be heard from the proprietary telephone and the single line telephone. You can answer the call by using either the proprietary telephone or the single line telephone. An answering machine, facsimile, MODEM (personal computer), etc., can be connected instead of a single line telephone. System Programming is required to enable this feature. Conditions PT • A proprietary telephone LCD will show you a single line telephone is in use. SLT • The following features will not work with a single line telephone connected in parallel with a proprietary telephone. Call Splitting Caller ID Call Waiting Conference Door Opener while talking to the doorphone External Feature Access Pickup dialing SLT • A single line telephone connected in parallel with a proprietary telephone cannot make a call in the following cases. - The proprietary telephone is set to the BGM mode. - The proprietary telephone is receiving a page through the built-in speaker. - The proprietary telephone is set to the PROGRAM mode. SLT • A single line telephone connected in parallel with a proprietary telephone will not ring in the following cases. - The proprietary telephone is set to Hands-free Answerback. - The proprietary telephone is set to "Voice Call" in the Intercom Alert Assignment. - The proprietary telephone is receiving a call from a doorphone. Programming Reference • System Programming - Installation Manual [610] Paralleled Telephone Connection 3-98 Telephone Features