Panasonic KX-TD161 Door Phone Card - Page 13
equivalent is recommended., The wire should be between 1.2 mm and 2.4 mm
 |
UPC - 037988826735
View all Panasonic KX-TD161 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
3. Insert the wires coming from the door openers into holes and tighten the screws. Pass all the wires through the Holder. Holder To door opener 4 To door opener 3 To door opener 2 To door opener 1 Note • Set the door opener paired with the doorphone. • For wiring, UL 1015, AWG 22 twisted wire or the equivalent is recommended. • The wire should be between 1.2 mm and 2.4 mm (3/64 inch and 3/32 inch) in diameter including the coating. D=1.2 mm-2.4 mm (3/64 inch-3/32 inch) 13
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16
 |
 |
13
3.
Insert the wires coming from the door openers into
holes and tighten the screws.
Pass all the wires through the Holder.
Note
•
Set the door opener paired with the doorphone.
•
For wiring, UL 1015, AWG 22 twisted wire or the
equivalent is recommended.
•
The wire should be between 1.2 mm and 2.4 mm
(3/64 inch and 3/32 inch) in diameter including
the coating.
To door opener 3
To door opener 4
Holder
To door opener 2
To door opener 1
D=1.2 mm-2.4 mm (3/64 inch-3/32 inch)