Panasonic KX-TG2313W KXTG2313 User Guide - Page 46

If the Following Appear on Your Display... The following will be displayed when the unit needs your attention. Display message Recharge battery Charge for 6h No link to base. Move closer to base, try again. Please lift up and try again. Error!! Phone book full System is busy. Please try again later. Line in use Store VM access# Cause & Remedy • The battery needs to be charged. Recharge the battery (p. 9). • The battery has been discharged. The handset will not work. Fully charge the battery (p. 9). • The handset has lost communication with the base unit. Walk closer to the base unit and try again or re-register the handset (p. 40). • Confirm the base unit's AC adaptor is plugged in. • Raise the base unit antenna. • A handset button was pressed while the handset was on the base unit. Lift the handset and press the button again. • When you tried to re-register the handset, the handset and base unit could not link for some reason, such as interference from electrical appliances. Move the handset and base unit away from any electrical appliances and try again. • When you tried to store an item in the phone book, the phone book memory was full. Press [OFF] to exit the programming mode. To erase other items from the phone book, see page 33. • The handset has lost communication with the base unit. Walk closer to the base unit and try again. • A parallel connected telephone is in use. • You have not stored the voice mail access number. Store the number (p. 34). 46