Panasonic KX-TG4773B KXTG4771 User Guide - Page 41
Error messages, Troubleshooting, Useful Information
View all Panasonic KX-TG4773B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Useful Information Error messages Display message Base no power or No link. Re-connect base AC adaptor. Busy Call phone company for your access # Check tel line Error!! Invalid Requires subscription to Caller ID. Use rechargeable battery. Cause/solution R The handset has lost communication with the base unit. Move closer to the base unit and try again. R Unplug the base unit's AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handset's registration may have been canceled. Re-register the handset (page 27). R The called unit is in use. R Other units are in use and the system is busy. Try again later. R The handset you are using is too far from the base unit. Move closer and try again. R You have not stored the voice mail access number. Store the number (page 36). R The supplied telephone line cord has not been connected yet or not connected properly. Check the connections (page 8). R Recording was too short. Try again. R There is no handset registered to the base unit matching the handset number you entered. R The handset is not registered to the base unit. Register the handset (page 27). R You must subscribe to a Caller ID service. Once you receive caller information after subscribing to a Caller ID service, this message will not be displayed. R A wrong type of battery such as Alkaline or Manganese was inserted. Use only the rechargeable Ni-MH batteries noted on page 4, 5. Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base unit's AC adaptor, then reconnect the base unit's AC adaptor. Remove the batteries from the handset, and then insert the batteries into the handset again. General use Problem The handset does not turn on even after installing charged batteries. The unit does not work. Cause/solution R Place the handset on the charger to turn on the handset. R Make sure the batteries are installed correctly (page 8). R Fully charge the batteries (page 8). R Check the connections (page 8). R Unplug the base unit's AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handset has not been registered to the base unit. Register the handset (page 27). For assistance, please visit http://www.panasonic.com/help 41