Panasonic KX-TGA290B Fhss Adt 2970 H/s Phone - Page 3

Handset, Registering, Handset [2], Registered

Page 3 highlights

Registration This cordless handset must be registered to the KX-TG2970 base unit. The cordless handset will be assigned the extension number at registration. Only one cordless handset can be registered at a time. Charge the battery fully. Make sure the base unit and the other cordless handsets are not being used. Have both the cordless handset and base unit nearby during registration. [-] Press MUTE on base unit, then OK on handset to register handset O K [MUTE] and Indicator To operate " OK ", press the right soft key. The cordless handset display shows the instructions as shown on the right. Press MUTE on base unit, then OK on handset to register handset BACK PLAY O K 1 Base unit: Press [MUTE]. • The MUTE indicator flashes. After the MUTE indicator starts flashing, the rest of the procedure must be completed within 1 minute. 2 Cordless Handset: (1) Press the soft key ( OK ). (2) Wait until 3 beeps sound and the display shows the new extension number. • Registration is complete. IN USE SPIPRIVACY1[-] Handset Registering Ex. Extension number 2 IN USE SPIPRIVACY1[2] Handset [2] Registered • The registered number "[1]" to "[3]" is shown on the top right of the display. • You can stop registration by pressing [OFF] on the cordless handset and pressing [MUTE] on the base unit. To cancel the handset registration, please see your base unit Operating Instructions. For assistance, please call: 1-800-ADT-ASAP - 3 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

– 3 –
For assistance, please call: 1-800-ADT-ASAP
Registration
This cordless handset must be registered to the KX-TG2970 base unit. The cordless
handset will be assigned the extension number at registration. Only one cordless handset
can be registered at a time.
Charge the battery fully. Make sure the base unit and the
other cordless
handsets are not being used.
Have both the
cordless
handset and
base unit nearby during registration.
The cordless handset display shows the instructions as shown
on the right.
The registered number “
[1]
” to “
[3]
” is shown on the top right of the display.
You can stop registration by pressing
[OFF]
on the cordless handset and pressing
[MUTE]
on the base unit.
1
Base unit:
Press
[MUTE]
.
The MUTE indicator flashes. After the MUTE indicator starts flashing, the rest of the
procedure must be completed within 1 minute.
2
Cordless Handset:
(1) Press the soft key (
).
(2) Wait until 3 beeps sound and the display shows
the new extension number.
Registration is complete.
To cancel the handset registration, please see your base unit Operating Instructions.
O K
O K
[-]
Press MUTE on
base unit, then
OK on handset to
register handset
[MUTE]
and Indicator
To operate “
”,
press the right soft key.
OK
Press MUTE on
base unit, then
OK on handset to
register handset
BACK
PLAY
OK
OK
SP
I
PRIVACY
1
Handset
Registering
IN USE
[-
]
SP
I
PRIVACY
1
Handset [2]
Registered
IN USE
[2
]
Ex. Extension number 2