Panasonic KX-TGA600S Expand Digital Handset-install - Eng/spa - Page 5
Wall mounting, Specifications - charger
View all Panasonic KX-TGA600S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Wall mounting 1 Drive the screws (not included) into the wall. 25.4 mm (1 inch) Screws (120 V AC, 60 Hz) 2 Mount the charger (A), then slide it down (B) and to the right (C) until it is secure. A B C Specifications General Operating environment: 5 °C - 40 °C (41 °F - 104 °F) Handset Frequency: 5.76 GHz - 5.84 GHz Dimensions: Approx. height 156 mm x width 48 mm x depth 33 mm (6 1/8 inches × 1 7/8 inches × 1 5/16 inches) Mass (Weight): Approx. 155 g (0.34 lb.) Power output: 200 mW (max.) Power supply: Ni-MH battery (3.6 V, 650 mAh) Charger Dimensions: Approx. height 68 mm × width 82 mm × depth 87 mm (2 11/16 inches × 3 7/32 inches × 3 7/16 inches) Mass (Weight): Approx. 80 g (0.18 lb.) Power consumption: Standby: Approx. 0.4 W Maximum: Approx. 3.3 W Power supply: AC adaptor (120 V AC, 60 Hz) Note: L Design and specifications are subject to change without notice. L The illustrations in these instructions may vary slightly from the actual product. For assistance, please visit http://www.panasonic.com/help 5