Panasonic KXNT136 KXNT136 User Guide - Page 8

Settings on the Programming Mode Setting Features You can customize many features of your telephone as shown in the following tables. Original settings are shown in the gray boxes. For later reference, place a check mark in the boxes below to indicate your customized settings. To enter the programming mode To program PAUSE Press PAUSE. OR program no. Follow Programming Input. OR AUTO DIAL STORE Press ENTER or STORE. OR program no. Follow Selection & Parameter. OR AUTO DIAL STORE Press ENTER or STORE. To exit CANCEL OR PAUSE Press CANCEL or PAUSE. Item Programming Input Would you like to turn on the 0 display backlight of the KXNT136? 04 1 (Display Backlight Selection) [Back light] 2 0 How do you prefer to receive an intercom call? 21 1 (Alternate Receiving-Ring/ [Voice Call] Voice) 2 0 Do you prefer to receive call 3 0 waiting for outside calls? [C.Wait CO] 1 0 Which type of call waiting for intercom calls do you 31 1 prefer? [C.Wait Ext] (Call Waiting Selection) 3 Which type of call waiting 0 tone do you prefer? 32 (Call Waiting Tone Type Selection) [C.Wait Tone] 1 Selection & Parameter Yes-ON in use [Automatic] Yes-always ON [Always On] No-always OFF [Always Off] Ringing [Tone Call] Directly-The party's voice is heard without ringing. [Voice Call] Ring only-Prohibiting the caller switching to the voice mode. [Voice Call Deny] No (No Tone) [CW Tone Off] Yes (Tone) [CW Tone On] No call [CW Tone Off] Tone [CW Tone On] Voice announcement through the handset [Whisper OHCA] Tone 1 [CW Tone 1] Tone 2 [CW Tone 2] 8