Panasonic KXTG2343 2.4 Ghz Digital Cdl - Page 48

Remote Operation from a Touch Tone Phone While outside, you can operate the Answering System from any touch tone phone. A synthesized voice menu will guide you through the Answering System (p. 49). • To skip the voice menu and operate the unit directly, see page 50. Summary of remote operation Call your unit from a touch tone phone. u Enter your remote code (see below) during or after the greeting message. • The number of new messages is heard, and the new messages will be played.* u After 3 seconds, the voice menu will start (p. 49). Follow the menu or enter direct commands (p. 50). u • To end remote operation, hang up. • The unit will announce the remaining recording time after playback if it is less than 3 minutes. • The messages are saved. * If "No new messages" is announced, the unit has only old messages. If "No messages" is announced, the unit has no messages. Remote Code Handset The remote code prevents unauthorized people from accessing your unit and listening to your messages. Choose any 2-digit number (00-99) for your remote code. The factory preset remote code is "11". If you do not program your own remote code, you can use "11". 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press Select. 3 Press Select at "Set answering". 4 Scroll to "Remote code" by pressing [d] or [B], then press Select. 5 Enter a 2-digit remote code (00-99). 6 Press Save, then press [OFF]. Initial setting KBack dB SelectL Set answering KBack dB SelectL Remote code KBack dB SelectL Remote code :11 KBack SaveL To confirm the remote code, repeat steps 1 to 4. • The remote code is displayed. When finished, press [OFF]. 48