Panasonic KXTG4324 Expandable Digital Cordless Answer Sys - Page 23

Programming Feature Ring count Ringer tone*4, *5 (Handset) Ringer volume (Handset) Set dial mode Set flash time*6 Set line mode*7 Store VM access# Time adjustment*8 (Caller ID subscribers only) V.M. access VM tone detect Voice prompt (Change language) Feature code {2}{1}{1} {1}{6}{1} {1}{6}{0} {1}{2}{0} {1}{2}{1} {1}{2}{2} {3}{3}{1} {2}{2}{6} {3}{3}{0} {3}{3}{2} {1}{1}{2} Setting code {2}-{7}: 2-7 rings {0}: Toll saver {1}-{3}: Tone -3 {4}-{7}: Melody 1-4 {1}: Low {2}: Medium {3}: {0}: Off {1}: Pulse {2}: {1}: {2}: 600ms {3}: 400ms {4}: 300ms {5}: 250ms {6}: 110ms {7}: 100ms {8}: 90ms {1}: A {2}: - {1}: {0}: Manual - {1}: {0}: Off {1}: {2}: Español System Page setting*1 r 34 - - - - r 14 r 16 r - r 36 r - - 37 r 36 r 14 *1 If "System setting" column is checked, you do not need to program the same item using another handset. *2 If you subscribe to Caller ID service and want to view the caller's information after lifting up the handset to answer a call, turn off this feature. *3 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys, including confirmation tones and error tones. *4 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to 3). If you select a melody, you cannot distinguish lines by their ringers. *5 If you select one of the melody ringer tones, the ringer tone will continue to play for several seconds even if the caller has already hung up. You may either hear a dial tone or no one on the line when you answer the call. *6 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary. The setting should stay at "700ms" unless pressing {FLASH} fails to pick up the waiting call. For assistance, please visit http://www.panasonic.com/help 23