Panasonic KXTG5571 KXTG5571 User Guide - Page 41
ROOM MONITOR, Setting room monitor, Monitoring a room
View all Panasonic KXTG5571 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Intercom Features Room monitor This feature allows you to listen in on a room where the handset or base unit is located. The monitored extension will not ring, allowing you to easily monitor, for example, a baby's room from different areas of the house. If you want to prevent your unit from being monitored by other extensions, leave this feature OFF (default). Setting room monitor Monitoring a room Important: L Before monitoring, make sure the unit to be monitored is not in use. L The handset to be monitored must be off the base unit. L If you receive a phone call while monitoring a room, you will hear 2 tones (page 56, 58). To answer the call with the handset, press {OFF}, then press {C} or {s}. To answer the call with the base unit, press {SP-PHONE} 2 times. Turning on/off the handset's room monitor feature This allows the handset to be monitored. 1 Press {MENU} (center of joystick). 2 Scroll to N, then press {SELECT}. 3 Scroll to "Room monitor", then press {SELECT}. 4 Push the joystick up or down repeatedly to select "On" or "Off". 5 Press {SAVE}, then press {OFF}. Turning on/off the base unit's room monitor feature This allows the base unit to be monitored. This feature must be set by using the handset. 1 Press {MENU} (center of joystick). 2 Scroll to N, then press {SELECT}. 3 Scroll to "Set base unit", then press {SELECT}. 4 Scroll to "Room monitor", then press {SELECT}. 5 Push the joystick up or down repeatedly to select "On" or "Off". 6 Press {SAVE}, then press {OFF}. Monitoring with the handset 1 Press {INTERCOM}, then press {MONITOR}. 2 To call the base unit, press {0}. To call another handset, press its extension number ({1} to {8}). L Your handset will start to monitor the room through the destination unit. L To monitor from the speaker, press {s}. To switch back to the receiver, press {C}. 3 To end monitoring, press {OFF}. L The base unit user can stop being monitored by pressing {INTERCOM} or {SP-PHONE}. The monitored handset user can stop being monitored by pressing {OFF}. Note: L The monitored handset displays "Room monitor". For assistance, please visit http://www.panasonic.com/consumersupport 41