Panasonic KXTG5671 5.8 Nxpd Tot 3hs

Panasonic KXTG5671 - 5.8 NXPD TOT 1HS Manual

Get Panasonic KXTG5671 - 5.8 NXPD TOT 1HS PDF manuals and user guides View all Panasonic KXTG5671 manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic KXTG5671 manual content summary:

  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 1
    Operating Instructions 5.8 GHz Digital Cordless Answering System Model No. KX-TG5671 5.8 GHz Expandable Digital Cordless Answering System with Two Handsets Model No. KX-TG5672 5.8 GHz Digital Cordless Answering System with Three Handsets Model No. KX-TG5673 Model shown is KX-TG5671. This unit is
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 2
    Table of Contents Introduction Introduction 3 About these operating instructions . . . . . 4 Accessory information 6 Important safety instructions 8 For best performance 10 Preparation Setting up the base unit 11 Setting up the handset 12 Controls 15 Displays 17 Setting the unit before use
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 3
    Introduction Introduction Thank you for purchasing a Panasonic cordless telephone. We recommend keeping a record of the following information for future reference. Serial No. (found on the bottom of the base unit) Name and address of dealer Date of purchase Attach your purchase receipt here.
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 4
    handsets and chargers in these operating instructions are for the following models only: KX-TG5672 KX-TG5673 Special feature N Slow Talk® You can slow down the voice of the person you are talking to, making it easier to hear and understand. 4 For assistance, please visit http://www.panasonic
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 5
    next operation. The words in the brackets indicate button names including soft key names (page 17) on the handset and base unit. Press {MENU}, then press {0}, {5}, {1}. Press {^} or {V} to select the desired setting. Press {Save}, then press {OFF}. Expanding your phone system KX-TG5672 users can
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 6
    item 1 AC adaptor for base unit Order number PQLV1W or PQLV256Z Quantity KX-TG KX-TG KX-TG 5671S 5672B 5673B *1 1 1 1 2 Telephone line cord PQJA10075Z 1 1 1 3 Wall mounting adaptor PQKL10068Z1 1 - - PQKL10068Z2 - 1 1 4 Battery 5 Handset cover*2 HHR-P104 1 2 3 PQYNTG5631SR
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 7
    handset with charger Headset T-adaptor Battery back-up power supply Order number HHR-P104 KX-TGA560 KX-TCA60, KX-TCA86, KX-TCA88HA, KX-TCA91, KX-TCA92, or KX-TCA98 KX-J66 KX-TCA200 Accessory item Belt clip KX-TG5671S KX-TG5672B KX-TG5673B PQKE10396Z1 PQKE10396Z3 PQKE10396Z3 Sales and support
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 8
    by the operating instructions. Improper adjustment may require extensive work by an authorized service center. E. If the product has been dropped or physically damaged. F. If the product exhibits a distinct change in performance. 13. During thunderstorms, avoid using telephones except cordless types
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 9
    telephone wires or terminals unless the telephone line has been disconnected at the network interface. L Use caution when installing or modifying telephone the instructions and limitations specified in this manual. contact the Panasonic Call energy. (The product operates in the frequency range
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 10
    be heard. Move away from the microwave oven and closer to the base unit. L If you use the handset near another cordless phone's base unit, noise may be heard. Move away from the other cordless phone's base unit and closer to your base unit. L The product should be kept away from heat sources such
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 11
    power can be supplied to the unit by connecting a Panasonic battery back-up power supply noted on page 7. If you subscribe to a DSL service Please attach a noise filter (contact your DSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 12
    Preparation Setting up the handset Connecting the charger Available model: KX-TG5672/KX-TG5673 L Use only the included Panasonic AC adaptor KX-TCA1 or PQLV256. (120 V AC, 60 Hz) Battery installation/replacement 1 Press the notch of the handset cover firmly, and slide it in the direction of the
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 13
    model: KX-TG5672/KX-TG5673 A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY (1-800822-8837) for information on how to recycle this battery. Battery charge Place the handset on the base contacts of the handset, base unit, and charger
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 14
    the battery needs to be charged, the handset beeps intermittently while it is in use. Panasonic battery performance Operation While in use (talking) While not the handset is off the base unit or charger, even when the handset is not in use. Hence the longer you leave the handset off the base unit
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 15
    Controls Base unit A BC D E KL Preparation K FG H IJ M N O PQ R ST U VW X Y Z A Display B {ERASE} C {ANSWER ON} ANSWER ON (TONE) U MIC (Microphone) V {1} {2} {3} (extension number) W {SP-PHONE} (Speakerphone) SP-PHONE indicator X {HOLD} Y {CONF} (Conference) Z {INTERCOM} {TRANSFER} INTERCOM
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 16
    operations not mentioned above L are displayed as soft key selections during operation (page 17). Example: {Mute} M N Using the navigator key B The handset D {C} (TALK) E Navigator key ({^} {V} {}) F {s} (SP-PHONE) G {*} (TONE) H {FLASH} {CALL WAIT} I Microphone J Charge
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 17
    ). H1 Handset number; displayed when paging, being paged, or registering*1. P Base unit is in programming mode. *1 KX-TG5672/KX-TG5673 Handset display items Displayed item J 5 Meaning Voice enhancer is on. Battery level For assistance, please visit http://www.panasonic.com/phonehelp
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 18
    make calls, change this setting depending on your telephone line service. The default setting is "Tone". "Tone": For tone dial service. "Pulse": For rotary pulse dial service. 1 {MENU} i {0}{5}{1} 2 Select the make the correction. 18 For assistance, please visit http://www.panasonic.com/phonehelp
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 19
    talking, press {OFF} or place the handset on the base unit or charger. Note: L "Line in use" is displayed when someone is talking on another handset (KX-TG5672/KX-TG5673) or another phone. Using the speakerphone 1 Lift the handset, dial the phone number, and press {s}. L Speak alternately with
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 20
    the speakerphone in a quiet environment. L While on a call, you can switch from the base unit to the handset: - Press {C} on the handset, then press {SP-PHONE} on the base unit. - If the handset is on the base unit, simply lift it. Answering calls When a call is being received, the ringer indicator
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 21
    44, "Transferring calls, conference calls". 2 Press {HOLD} again. L To release the hold, press {C}. L The base unit user can take the call by pressing {SP-PHONE}. L Another handset user can take the call by pressing {C}. Base unit Press {HOLD} during an outside call. L To release the hold, press {SP
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 22
    handset display during a call. Base unit To mute your voice, press {MUTE}. L To return to the conversation, press {MUTE} or {SP-PHONE}. FLASH button Pressing {FLASH} allows you to use special features of your host PBX such as transferring an extension call, or accessing optional telephone services
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 23
    To join the conversation, press {SPPHONE} when the handset is on an outside call. Note for handset and base unit: L A maximum of 4 parties (including 1 outside party) can join a conversation using 3 extensions (KX-TG5672/KXTG5673). For assistance, please visit http://www.panasonic.com/phonehelp 23
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 24
    handset phonebook and search for phonebook items by name. Adding items to the phonebook 1 {Phonebook} 2 {Add} 3 Enter the name (max. 16 characters). i {Next} 4 Enter the phone desired item. 3 Press {C} to dial the phone number. 24 For assistance, please visit http://www.panasonic.com/phonehelp
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 25
    {C} to dial the phone number. Editing items phone numbers in the handset phonebook while you are on a call. This feature can be used, for example, to dial a calling card access number or bank account PIN that you have stored in the handset phonebook, without having to dial manually pulse service, you
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 26
    Phonebook Copying handset phonebook items Available model: KX-TG5672/KX-TG5673 You can copy one or all of the phonebook items from one handset to another. Important: L Ringer ID and light-up Send} 3 Press {OFF} after the long beep. 26 For assistance, please visit http://www.panasonic.com/phonehelp
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 27
    will be erased. L We recommend you make a note of which phone numbers are stored in which dial keys. PAUSE button (for PBX/long distance service users) A pause is sometimes required when making calls using a PBX or long distance service. Base Unit Speed Dialer For example, if you need to dial the
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 28
    the multiple handsets (KXTG5672/KX-TG5673, page 30). Call Waiting Caller ID display If you subscribe to both Caller ID and Call Waiting with Caller ID services, the 2nd caller's information is displayed after you hear a Call Waiting tone (page 22). Please contact your telephone company for details
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 29
    Caller ID Service Ringer ID is used after Caller ID information is displayed. If you select "No Ringer ID", the handset uses the ringer tone you selected on page 34 when a call is received from that color. 4 {Save} i {OFF} For assistance, please visit http://www.panasonic.com/phonehelp 29
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 30
    Service Caller list Viewing the caller list and calling back 1 Press {^} or {V} to enter the caller list. 2 Press {V} to search from the most recent call, or {^} to search from the oldest call. 3 {C} Note: L KX-TG5672/KX-TG5673: Each handset other incoming phone numbers each panasonic.com/phonehelp
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 31
    the desired item. i {Select} L To edit the number, press {Edit} repeatedly until the phone number is shown in the desired format. 3 {Save} L If there is the name information the caller list. 2 {All erase} i {Yes} Caller ID Service For assistance, please visit http://www.panasonic.com/phonehelp 31
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 32
    handset. To access the features, there are 2 methods: scrolling through the display menus (page 32) or using the direct commands (page 33). L Mainly the direct command method is used in these operating instructions Copy phonebook*2 Talking CallerID Customer support Sub-menu 1 - Ringer volume
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 33
    handsets, you do not need to program the same item using another handset (KX-TG5672/KX-TG5673). *2 KX-TG5672/KX-TG5673 handset (KXTG5672/KX-TG5673). L If you make a mistake or enter the wrong code, press {OFF}, then start again by pressing {MENU}. For assistance, please visit http://www.panasonic
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 34
    {0}{0} {0}{6}{3} {1}{4} Ring count Ringer tone (Handset)*4 {0}{6}{1} {1}{2} Ringer volume (Handset) {1}{1} Set dial mode {0}{5}{1} Setting code Pulse {2}: (page 18) System setting - - - - - r - - - - r - r - r - - r 34 For assistance, please visit http://www.panasonic.com/phonehelp
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 35
    Off - (page 28) {1}: r {0}: Manual {1}: On {0}: - *1 If you subscribe to Caller ID service and want to view the caller's information after lifting up the handset to answer a call, turn off this feature. *2 KX-TG5672/KX-TG5673 *3 You can select whether or not key tones
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 36
    remaining recording time when operating the answering system. Erase the call through the base unit's speaker. To adjust the base unit, or by pressing {C} on the handset. Turning off the call screening feature When the base GREETING REC} again. 3 After the base unit beeps, speak clearly about 20 cm
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 37
    to call again. Answering System Listening to messages using the base unit When new messages have been recorded, the MESSAGE indicator on the base unit flashes. Press {MESSAGE}. L The unit plays while the unit is not being used. For assistance, please visit http://www.panasonic.com/phonehelp 37
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 38
    The handset plays new messages including memo messages. L When you have no new messages, the handset plays 's voice guidance starts. Operate the answering system by following operate the answering system by pressing dial keys on the handset is played. *2 To resume operation, press a command key within
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 39
    Base unit 1 {MEMO} 2 After the unit beeps, speak clearly about 20 cm (8 inches) away from the MIC. 3 To stop recording, press {STOP}. Remote operation Using a touch tone phone, you can call your phone remote commands (page 40). For assistance, please visit http://www.panasonic.com/phonehelp 39
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 40
    call from a touch tone phone, you can enter your remote code and begin remote operation (page 39). Skipping the phone number. When the answering system picks up, press {*} to skip the greeting message and record your message after the beep. 40 For assistance, please visit http://www.panasonic
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 41
    operating can change the number of times the phone rings before the unit answers calls. phone from outside to listen to new messages Mail service provided by your telephone company service provided by your telephone company before changing this setting. - Change the ring count of the Voice Mail service
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 42
    on the handset flashes when new messages are recorded (page 38). The default setting is "Off". 1 {MENU} i {0}{#} 2 Select the desired setting. i {Save} i {OFF} Note: L While message alert is on, battery operating time is shortened (page 14). 42 For assistance, please visit http://www.panasonic.com
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 43
    for 1 minute. L To stop paging, press {SP-PHONE} or {INTERCOM}. 2 To end the intercom call, press {SP- PHONE}. KX-TG5672/KX-TG5673 Making an intercom call Handset 1 {INTERCOM} 2 To page the base unit, press {0}. To page another handset, enter its extension number ({1} - {3}). L The destination unit
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 44
    between the handset and base unit, and between 2 handsets. The handset and base unit, or 2 handsets can have a conference call with an outside party. Handset 1 During an outside call, press {INTERCOM} to put the call on hold. 2 KX-TG5671 Press {base}. KX-TG5672/KX-TG5673 To page the base unit, press
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 45
    being routed to the handset. To establish a conference call, press {CONF}. L To leave the conference, press {SP- PHONE}. The other parties can continue the conversation. L To put the outside call on hold, press {HOLD}. To resume the conference, press {CONF}. KX-TG5672/KX-TG5673 1 During an outside
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 46
    OK}, then wait until the handset beeps. KX-TG5672/KX-TG5673 Important: L If you accidentally assign another handset's extension number to the base unit, the originally assigned handset stops functioning. Confirm the extension number of the handset by placing it on the base unit or charger. Lift the
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 47
    line cord inside the wall mounting adaptor (A). Connect the telephone line cord (B). Useful Information 3 Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until it clicks into place. A B 2 Insert the hooks on the wall mounting adaptor into the
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 48
    Useful Information 4 Connect the telephone line cord. Mount the unit by inserting the mounting pins into the round openings on the adaptor (for pin 2, use round cut out at the bottom of the adaptor if you are using the 4 inches phone plate), then sliding the unit down to secure it. Connect the AC
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 49
    Information Charger Available model: KX-TG5672/KX-TG5673 1 Drive the screws (not included) into the wall using the wall template as a guide. 25.4 mm (1 inch) Headset (optional) Connecting a headset to the handset allows hands-free phone conversations. Please use only a Panasonic headset (page
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 50
    the handset was on the base unit or charger. Lift the handset and press the button again. L Other units are in use and the system is busy. Try again later. L Another user is listening to messages. Try again later. *1 KX-TG5672/KX-TG5673 50 For assistance, please visit http://www.panasonic.com
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 51
    connect a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your telephone company. Problem I cannot program items. While programming, the handset starts to ring
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 52
    Talk feature. L If another handset is having an intercom call with the base unit, you cannot use the Slow Talk feature.*1 L If someone is operating the answering system, you cannot use the Slow Talk feature. *1 KX-TG5672/KX-TG5673 52 For assistance, please visit http://www.panasonic.com/phonehelp
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 53
    use and try again. *1 KX-TG5672/KX-TG5673 Caller ID Problem The handset does not display the caller's name and/or phone number. The handset or base unit does not announce the displayed caller names. Cause/solution L You have not subscribed to Caller ID service. Contact your telephone company to
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 54
    ID services (CWID). *1 KX-TG5672/KX-TG5673 Answering system Problem I cannot listen to messages from a remote location. The unit does not record new messages. I cannot operate the answering system. The message indicator on the handset flashes. Cause/solution L A touch tone phone is required
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 55
    in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. If trouble is experienced with this equipment
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 56
    about what will disable alarm equipment, consult your telephone company or a qualified installer. This equipment is operation. Privacy of communications may not be ensured when using this phone and used in accordance with the instructions, may cause harmful interference to panasonic.com/phonehelp
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 57
    Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference is experienced, move the cordless telephone further
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 58
    Operating environment Frequency Base unit 5 °C - 40 °C (41 °F - 104 °F) 5.76 GHz - 5.84 GHz Dimensions Mass (Weight) Power consumption Power output Power supply Handset mAh) Dimensions Mass (Weight) Power consumption Power supply *1 KX-TG5672/KX-TG5673 Approx. height 51 mm x width 88 mm x depth
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 59
    only to the original purchaser and only covers products purchased as new. Mail-In Service For assistance in the continental U.S.A. in obtaining repairs please ship the product prepaid to: Panasonic Services Company Customer Servicenter 4900 George McVay Drive Suite B Door #12 McAllen, TX 78503
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 60
    the problem is not handled to your satisfaction, then write to the warrantor's Consumer Affairs Department at the addresses listed for the warrantor. PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY. 60 For assistance, please visit http://www.panasonic.com
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 61
    Purchases Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at: http://www.pasc.panasonic.com or, send your request by E-mail to: [email protected] You may also contact us directly at: 1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 62
    44 Connections: 11, 12 Customer support: 35 D Date and time: operation: 39 Ring color: 34 Ring count: 41 Ringer ID: 29 Ringer off Base unit: 21 Handset: 20, 34 Ringer tone Base unit: 21 Handset: 34 Rotary service: 22 S Slow Talk: 23 Soft keys: 17 62 For assistance, please visit http://www.panasonic
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 63
    : 27 SP-phone: 19 T Talking Caller ID: 28 Time adjustment: 35 Toll saver: 41 Tone: 22 Transferring calls: 44 Troubleshooting: 51 TTY: 7, 61 V VE (Voice Enhancer): 23 Voice guidance: 38, 40 Volume Base unit ringer: 21 Base unit speaker: 20 Handset receiver: 19 Handset ringer: 34 Handset speaker: 19
  • Panasonic KXTG5671 | 5.8 Nxpd Tot 3hs - Page 64
    assistance with setup or operation 1 Visit our website: http://www.panasonic.com/phonehelp 2 Contact us via the web at: http://www.panasonic.com/contactinfo 3 Call to Panasonic Services Company Customer Servicenter, prepaid and adequately insured. L Do not send your unit to Panasonic Consumer
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
This unit is compatible with Caller ID. To use this feature, you must subscribe to
the appropriate service offered by your service provider.
Please read these Operating Instructions before using the unit and save for
future reference.
For assistance, visit our website:
for customers in the U.S.A. or Puerto
Rico.
Charge the handset battery for 7 hours before initial use.
Operating Instructions
5.8 GHz Digital Cordless
Answering System
Model No.
KX-TG5671
5.8 GHz Expandable Digital Cordless
Answering System with Two Handsets
Model No.
KX-TG5672
5.8 GHz Digital Cordless
Answering System with Three Handsets
Model No.
KX-TG5673
Model shown is KX-TG5671.