Panasonic KXTG5671 5.8 Nxpd Tot 3hs - Page 53

Useful Information Phonebook Problem Copying stopped with an item displayed.*1 Cause/solution L The destination handset may have lost communication with the base unit, or the destination unit user may have pressed {C} or {s}. The displayed phonebook item was not copied to the unit. Press {OFF}. Confirm that the destination unit is not in use and try again. *1 KX-TG5672/KX-TG5673 Caller ID Problem The handset does not display the caller's name and/or phone number. The handset or base unit does not announce the displayed caller names. Cause/solution L You have not subscribed to Caller ID service. Contact your telephone company to subscribe. L If your unit is connected to any additional telephone equipment such as a Caller ID box or cordless telephone jack, disconnect the unit from the equipment and plug the unit directly into the wall jack. L If your unit is connected to a telephone line with DSL service, we recommend connecting a noise filter between the base unit and the telephone line jack. Contact your DSL provider for details. L The name display service may not be available in some areas. Contact your telephone company for details. L Other telephone equipment may be interfering with this unit. Disconnect the other equipment and try again. L The caller requested not to send caller information (page 28). L If a call is being transferred to you, the caller information is not displayed. L The handset or base unit's ringer volume is turned off. Adjust it (page 21, 34). L The Talking Caller ID feature is turned off. Turn it on (page 35). L The ring count for the answering system is set to "2" or "Toll saver". Select a different setting (page 41). L If the base unit and another handset are having an intercom call, your handset does not announce caller information.*1 For assistance, please visit http://www.panasonic.com/phonehelp 53