Panasonic KXTG5761 KXTG5761 User Guide - Page 14
PREPARATION, SETTING UP THE BASE UNIT, Connecting the AC adaptor and, telephone line cord
View all Panasonic KXTG5761 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Preparation Setting up the base unit Connecting the AC adaptor and telephone line cord Connect the telephone line cord until it clicks into the base unit (A) and telephone line jack (B). Connect the AC adaptor cord by pressing the plug firmly (C). L Use only the included Panasonic AC adaptor PQLV207. C line or to the same telephone jack using a Panasonic T-adaptor (page 10). If you subscribe to a DSL service Please attach a noise filter (contact your DSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following: - Noise is heard during conversations. - Caller ID features (page 36) do not function properly. Hook A To single-line B telephone jack (RJ11C) (120 V AC, 60 Hz) Noise filter To single-line telephone jack (RJ11C) Note: L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) L The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. L The unit will not work during a power failure. We recommend connecting a corded telephone to the same telephone 14 For assistance, please visit http://www.panasonic.com/phonehelp