Panasonic MCGG283 MCGG283 User Guide - Page 32

Replacing Belt Motor Shaft Arbre d'entraînement du moteur Eje del motor Belt Courroie Correa Agitator Agitateur Agitador ➢ Replace belt whenever a burning rubber smell caused by excessive slippage occurs. ➢ Remove lower plate. ➢ Remove agitator by carefully lifting out. ➢ Remove worn or broken belt. ➢ Clean agitator. Belt Courroie Motor Shaft Correa Arbre d'entraînement du moteur Eje del motor Agitator Agitateur Agitador Agitator Agitateur Agitador ➢ Loop new belt (Panasonic Type UB8 only) around motor shaft and agitator pulley; see illustration for correct belt routing. ➢ Reinstall agitator back into nozzle housing grooves. ➢ After reinstalling the agitator, turn it by hand to make sure that belt is not twisted or pinched and that all rotating parts turn freely. Nozzle Tête d'aspiration Boquilla End Cap Bouchon Tapa del extremo Groove Ouverture Ranura ➢ Reinstall lower plate. - 32 -