Panasonic MCV413 MCV413 User Guide - Page 38

Before Requesting Service, Possible Cause

Get Panasonic MCV413 - COMMERCIAL VACUUM PDF manuals and user guides View all Panasonic MCV413 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

BEFORE REQUESTING SERVICE WARNING Electric Shock or Personal Injury Hazard. Disconnect the electrical supply before servicing or cleaning the unit. Failure to do so could result in electric shock or personal injury from cleaner suddenly starting. Review this chart to find do-it-yourself solutions for minor performance problems. Any service needed, other than those described in these Operating Instructions, should be performed by an authorized service representative. PROBLEM Cleaner will not run. POSSIBLE CAUSE 1. Unplugged at wall outlet. 2. ON-OFF switch not turned on. 3. Tripped circuit breaker/blown fuse at household service panel. POSSIBLE SOLUTION 1. Plug in firmly. Push ON-OFF switch to On. 2. Push ON-OFF switch to ON. 3. Reset circuit breaker or replace fuse. Poor job of dirt pickup. 1. Full or clogged dust bin. 2. Broken belt. 3. Clogged hose or nozzle. 4. Hose not inserted fully. 5. Worn agitator. 6. Hole in hose. 7. Dirty filters. 1. Clean dust bin. 2. Replace belt. 3. Clean hose or nozzle area. 4. Insert hose. 5. Replace agitator. 6. Replace hose. 7. Clean/Change filters. - 38 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
- 38 -
BEFORE REQUESTING SERVICE
WARNING
Electric Shock or Personal Injury Hazard.
Disconnect the electrical supply before servicing or cleaning the unit.
Failure to do
so could result in electric shock or personal injury from cleaner suddenly starting.
Review this chart to find do-it-yourself solutions for minor performance
problems. Any service needed, other than those described in these
Operating Instructions, should be performed by an authorized service
representative.
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Cleaner
1.
Unplugged at wall outlet.
1.
Plug in firmly.
Push ON-OFF
will not run.
switch to On.
2.
ON-OFF switch not turned on.
2.
Push ON-OFF switch to ON.
3.
Tripped circuit breaker/blown
3.
Reset circuit breaker or replace
fuse at household service panel.
fuse.
Poor job of dirt
1.
Full or clogged dust bin.
1.
Clean dust bin.
pickup.
2.
Broken belt.
2.
Replace belt.
3.
Clogged hose or nozzle.
3.
Clean hose or nozzle area.
4.
Hose not inserted fully.
4.
Insert hose.
5.
Worn agitator.
5.
Replace agitator.
6.
Hole in hose.
6.
Replace hose.
7.
Dirty filters.
7.
Clean/Change filters.