Panasonic MCV5203 MCV5203 User Guide - Page 32
CLEANING AGITATOR, REPLACING BRUSHES, the agitator.
View all Panasonic MCV5203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Cleaning Agitator ➢ Clean agitator after every five uses and every time the belt is replaced. ➢ Remove lower plate. ➢ Cut off any carpet pile and lint entangled around agitator with a pair of scissors. ➢ Remove agitator. ➢ Remove any string or debris located on the end caps, washers or agitator shaft. ➢ Reinstall agitator and lower plate. Replacing Brushes Card Carte Tarjeta ➢ When the bristles on the agitator are worn so that they do not touch a card held across the lower plate, the brushes should be replaced. ➢ Remove lower plate and agitator. E-Clip Bride en E Sujetador de E ➢ Remove the E-clip from agitator shaft and end cap. ➢ Do not bend agitator shaft or lose Eclip or spacer. Agitator Shaft Arbre d'entraînement Eje del agitador Right End Cap Bouchon droit Tapa del extremo derecho ➢ Pull agitator shaft out of agitator body. ➢ Pull, or pry out, agitator holder and agitator pulley. ➢ Push each brush out of agitator body as shown. Agitator Pulley Poulie de l'agitateur Polea del agitador Agitator Holder Support de l'agitateur Soporte del agitador ➢ Install new brushes by reversing procedure. ➢ Reinstall agitator holder and agitator pulley completely. Push Off Pousser Empuje hacia fuera ➢ Reinstall the agitator shaft, end cap and E-clip. ➢ See exploded view for correct assembly of parts. Brush Brosse Cepillo ➢ Position belt over agitator pulley on the agitator. ➢ Reinstall agitator and lower plate. - 32 -