Panasonic NE1022F NE1022F User Guide - Page 14
Programming, the,DoUble, Quantity, multiple, portion, heating
View all Panasonic NE1022F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
44: C. Programming.the,DoUble Quantity Pad - For multiple portion heating: Your oven is factory set to automatically double the programmed time for multiple portion heating - this is the correct setting for heating multiple portions of most small foods items. No further programming of the time is necessary for these food items. The time required to heat multiple portions of some large platters and most bulk food loads is slightly less than double that of a single portion. This model incorporates a Multiple Portion Heating Custom Program feature that allows you to customize the heating time and/or power level for multiple portions of your menu items. For example, if Memory Pad 3 is set for 6 minutes at DEFROST, 12 minutes at DEFROST is set for double quantity heating automatically. However, if your own tests have determined that the correct heating times required is less (only 10 minutes 30 seconds at DEFROST) for two portions, the "Multiple Portion Heating Custom Program" feature can be programmed for 10 minutes 30 seconds at DEFROST. Example: To program 30 seconds at HIGH Power on Memory Pad Number 2 1. e u_ PROG. LU O 2. DOUBLE QUANTITY (x 2) •Press the PROG. Pad. NOTE: •If no PROG Indicator appeares in the Display Window, "Program Lock' should be cancelled (see page 15). •Do not keep pressing PROG. Pad for more than 30 seconds, or a false failure code may result. •Press DOUBLE QUANTITY (x 2) Pad. Display Window PROG X2 PROC 3. :2° 1 •Press Memory Pad 2. The pad number and the previously selected time and power level for multiple portion heating will appear in theDisplay Window. 02 PROC 1 •The pad number and Stage Heating Indicator will appear in the Display Window again. 4. 11111I POWER 5. a :30 0 3:30 •Press the POWER Level Selector Pad once. The Memory Pad display will go out. •Press the Memory Pads 3, 0. 02 PROC I 02 PROC 0 6. PROG. •Press the PROG. Pad again. You have completed programming the selected Memory Pad for multiple portion heating. 22 PROC •2 seconds later, the setting for single stage heating will appear in the Display Window. • 30 •2 seconds later, the Display Window will go blank. NOTE: • Program the remaining Memory Pad as desired by repeating steps 1-6 above. (You may insert up to 10 memory programs.) DO NOT OPEN THE OVEN DOOR while programming. • When the PROG indicator is blinking, the program can be cancelled and/or the pad erased by pressing STOP/RESET Pad. -14-