Panasonic NNC994S Microwave/conv.oven - Page 6

INSTALLATION AND GROUNDING INSTRUCTIONS, Ceramic Tray, Roller Ring, Placement of Your Oven - trim kit

Page 6 highlights

Before Operation IMPORTANT SAFETY INSTRUCTIONS (continued) Ceramic Tray 1. DO NOT operate the oven without the Roller Ring and the Ceramic Tray in place. 2. DO NOT operate the oven without the Ceramic Tray fully engaged on the drive hub. Improper cooking or damage to the oven could result. Verify that the Ceramic Tray is properly engaged and rotating by observing its rotation when you press Start. Note: The Ceramic Tray can turn in either direction. 3. Use only the Ceramic Tray specifically designed for this oven. DO NOT substitute any other ceramic tray. 4. If the Ceramic Tray is hot, allow to cool before cleaning or placing in water. 5. DO NOT cook directly on the Ceramic Tray. Always place food in a microwave safe dish, or on a rack set in a microwave safe dish. 6. If food or utensils on the Ceramic Tray touch oven walls, causing the tray to stop moving, the tray will automatically rotate in the opposite direction. Roller Ring 1. The Roller Ring and oven floor should be cleaned frequently to prevent excessive noise. 2. Always replace the Roller Ring and the Ceramic Tray in their proper positions. 3. The Roller Ring must always be used for cooking along with the Ceramic Tray. Installation & Grounding Instructions Placement of Your Oven Power Supply 1. Oven must be placed on a flat, stable surface. 1. A short power-supply cord is provided to reduce For proper operation, the oven must have the risks resulting from becoming entangled in or sufficient air flow. Allow 3'' ( 8 cm ) of space on tripping over a longer cord. both sides of the oven and 6" ( 15 cm ) of space 2. Longer cord sets or extension cords are on top of the oven. available and may be used if care is exercised in a. DO NOT block air vents. If they are blocked their use. during operation, the oven may overheat. If 3. If a long cord or extension cord is used, (1) the the oven overheats, a thermal safety device marked electrical rating of the cord set or will turn the oven off. The oven will remain extension cord should be at least as great as the inoperable until it has cooled. electrical rating of the appliance, (2) the b. DO NOT place the oven near a hot, damp extension cord must be a grounding-type 3-wire surface such as a gas or electric range, or cord, and (3) the longer cord should be arranged dishwasher. so that it will not drape over the countertop or c. DO NOT operate the oven when room tabletop where it can be pulled on by children or humidity is too high. tripped over accidentally. 2. This oven was manufactured for household use only. Wiring Requirements 3. This oven may be built into a wall cabinet, if 1. The oven must be on a SEPARATE CIRCUIT. No desired, by using the proper trim kit, which may other appliance should share the circuit with the be purchased from a local dealer. microwave oven. If it does, the branch circuit Follow all installation instructions packed with kit. fuse may blow or the circuit breaker may trip, or Grounding Instructions the food may cook slower than recommended in this manual. This appliance must be grounded. In the event of an 2. The VOLTAGE used must be the same as electrical short circuit, grounding reduces the risk of specified on this microwave oven (120 V). Using electric shock by providing an escape wire for the a higher voltage is dangerous and may result in electric current. This appliance is equipped with a a fire or other accident causing oven damage. cord having a grounding wire with a grounding plug. Using a lower voltage will cause slow cooking. The plug must be plugged into an outlet that is Panasonic is NOT responsible for damage properly installed and grounded. resulting from the use of the oven with other than specified voltage. WARNING-Improper use of the grounding plug 3. The oven must be plugged into at least a 20 can result in a risk of electric shock. AMP, 120 VOLT, 60 Hz GROUNDED OUTLET. Consult a qualified electrician or service person if Where a standard two-prong outlet is the grounding instructions are not completely encountered, it is the personal responsibility and understood, or if it is uncertain whether the obligation of the consumer appliance is properly grounded or not. to have it replaced with If it is necessary to use an extension cord, use only a properly grounded a three wire extension cord that has a three-blade three-prong outlet. grounding plug, and a three-slot receptacle that will accept the plug on the appliance. The marked rating of the extension cord should be equal to, or greater than, the electrical rating of the appliance. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

Before Operation
6
IMPORTANT SAFETY INSTRUCTIONS
(continued)
Installation & Grounding Instructions
Ceramic Tray
1.
DO NOT
operate the oven without the Roller
Ring and the Ceramic Tray in place.
2.
DO NOT
operate the oven without the Ceramic
Tray fully engaged on the drive hub. Improper
cooking or damage to the oven could result.
Verify that the Ceramic Tray is properly engaged
and rotating by observing its rotation when you
press Start.
Note:
The Ceramic Tray can turn in
either direction.
3.
Use only the Ceramic Tray specifically designed
for this oven.
DO NOT
substitute any other ceramic tray.
4.
If the Ceramic Tray is hot, allow to cool before
cleaning or placing in water.
5.
DO NOT
cook directly on the Ceramic Tray.
Always place food in a microwave safe dish, or
on a rack set in a microwave safe dish.
6.
If food or utensils on the Ceramic Tray touch
oven walls, causing the tray to stop moving, the
tray will automatically rotate in the opposite
direction.
Roller Ring
1.
The Roller Ring and oven floor should be
cleaned frequently to prevent excessive noise.
2.
Always replace the Roller Ring and the Ceramic
Tray in their proper positions.
3.
The Roller Ring must always be used for cooking
along with the Ceramic Tray.
Placement of Your Oven
1.
Oven must be placed on a flat, stable surface.
For proper operation, the oven must have
sufficient air flow. Allow 3’’ ( 8 cm ) of space on
both sides of the oven and 6” ( 15 cm ) of space
on top of the oven.
a. DO NOT block air vents. If they are blocked
during operation, the oven may overheat. If
the oven overheats, a thermal safety device
will turn the oven off. The oven will remain
inoperable until it has cooled.
b.
DO NOT place the oven near a hot, damp
surface such as a gas or electric range, or
dishwasher.
c.
DO NOT operate the oven when room
humidity is too high.
2.
This oven was manufactured for household use
only.
3.
This oven may be built into a wall cabinet, if
desired, by using the proper trim kit, which may
be purchased from a local dealer.
Follow all installation instructions packed with kit.
Grounding Instructions
This appliance must be grounded. In the event of an
electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the
electric current. This appliance is equipped with a
cord having a grounding wire with a grounding plug.
The plug must be plugged into an outlet that is
properly installed and grounded.
WARNING
Improper use of the grounding plug
can result in a risk of electric shock.
Consult a qualified electrician or service person if
the grounding instructions are not completely
understood, or if it is uncertain whether the
appliance is properly grounded or not.
If it is necessary to use an extension cord, use only
a three wire extension cord that has a three-blade
grounding plug, and a three-slot receptacle that will
accept the plug on the appliance. The marked rating
of the extension cord should be equal to, or greater
than, the electrical rating of the appliance.
Power Supply
1.
A short power-supply cord is provided to reduce
the risks resulting from becoming entangled in or
tripping over a longer cord.
2.
Longer cord sets or extension cords are
available and may be used if care is exercised in
their use.
3.
If a long cord or extension cord is used, (1) the
marked electrical rating of the cord set or
extension cord should be at least as great as the
electrical rating of the appliance, (2) the
extension cord must be a grounding-type 3-wire
cord, and (3) the longer cord should be arranged
so that it will not drape over the countertop or
tabletop where it can be pulled on by children or
tripped over accidentally.
Wiring Requirements
1.
The oven must be on a SEPARATE CIRCUIT.No
other appliance should share the circuit with the
microwave oven. If it does, the branch circuit
fuse may blow or the circuit breaker may trip, or
the food may cook slower than recommended in
this manual.
2.
The VOLTAGE used must be the same as
specified on this microwave oven (120 V). Using
a higher voltage is dangerous and may result in
a fire or other accident causing oven damage.
Using a lower voltage will cause slow cooking.
Panasonic is
NOT
responsible for damage
resulting from the use of the oven with other than
specified voltage.
3.
The oven must be plugged into at least a 20
AMP, 120 VOLT, 60 Hz GROUNDED OUTLET.
Where a standard two-prong outlet is
encountered, it is the personal responsibility and
obligation of the consumer
to have it replaced with
a properly grounded
three-prong outlet.