Panasonic NNSD698S User Manual - Page 23

Timer Feature

Page 23 highlights

IP1813_38X00CP_14_080327 2008.3.27 14:25 Page 23 Timer Feature This feature allows you to program the oven as a kitchen timer. It can also be used to program a standing time after cooking is completed and/or to program a delay start. To Use as a Kitchen Timer: Example: To count down 5 minutes. 1. • Press Timer/Clock. 2. Time Dial • Set time, using Time Select Dial to 5 minutes. Rotate 3. • Press Start. ➤Time will count down without oven operating. To Set Stand Time: Example: To cook at P6 power for 3 minutes, with stand time of 5 minutes. 1. Press 5 times 2. Time Dial • Enter the desired Power Level (see page 14 for directions). • Set cooking time, using Time Select Dial to 3 minutes. Rotate 3. • Press Timer/Clock. 4. Time Dial • Set stand time, using Time Select Dial to 5 minutes. Rotate 5. • Press Start. ➤Cooking will start. After cooking, stand time will count down without oven operating. CAUTION: If oven lamp is lit while using the timer feature, the oven is incorrectly programmed. Stop oven immediately and re-read instructions. To Set Delay Start: Example: To delay the start of cooking for 5 minutes, and cook at P6 power for 3 minutes. 1. • Press Timer/Clock. 2. Time Dial • Set delay time, using Time Select Dial to 5 minutes. Rotate 3. Press 5 times • Enter the desired Power Level (see page 14 for directions). 4. Time Dial • Set cooking time, using Time Select Dial to 3 minutes. Rotate 5. • Press Start. ➤Delay time will count down. Then cooking will start. NOTE: 1. When each stage finishes, a two-beep signal sounds. At the end of the program, the oven will beep five times. 2. If the oven door is opened during Stand Time, Kitchen Timer or Delay Time, the time on the display will continue to count down. 3. Stand time and Delay Start cannot be programmed before any automatic Function. This is to prevent the starting temperature of food from rising before defrosting or cooking begins. A change in starting temperature could cause inaccurate results. 4. The maximum programmable time of Standing Time, Kitchen Time or Delay Time is up to 90 minutes. 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

21
Timer Feature
NOTE:
1. When each stage finishes, a two-beep
signal sounds. At the end of the pro-
gram, the oven will beep five times.
2. If the oven door is opened during
Stand Time, Kitchen Timer or Delay
Time, the time on the display will con-
tinue to count down.
3. Stand time and Delay Start cannot be
programmed before any automatic
Function. This is to prevent the starting
temperature of food from rising before
defrosting or cooking begins. A change
in starting temperature could cause
inaccurate results.
4. The maximum programmable time of
Standing Time, Kitchen Time or Delay
Time is up to 90 minutes.
CAUTION:
If oven lamp is lit while using the timer
feature, the oven is incorrectly pro-
grammed. Stop oven immediately and
re-read instructions.
This feature allows you to program the
oven as a kitchen timer. It can also be
used to program a standing time after
cooking is completed and/or to program a
delay start.
To Use as a Kitchen Timer:
Example: To count down 5 minutes.
1.
• Press
Timer/Clock
.
2.
• Set time, using Time
Select Dial to 5 min-
utes.
3.
• Press
Start
.
Time will count
down without oven
operating.
To Set Stand Time:
Example: To cook at P6 power for 3
minutes, with stand time of
5 minutes.
1.
• Enter the desired
Power Level
(see
page 14 for direc-
tions).
• Set cooking time,
using Time Select Dial
to 3 minutes.
2.
To Set Delay Start:
Example: To delay the start of cooking
for 5 minutes, and cook at P6
power for 3 minutes.
1.
• Enter the desired
Power Level
(see
page 14 for direc-
tions).
• Set cooking time,
using Time Select Dial
to 3 minutes.
3.
• Press
Timer/Clock
.
2.
• Set delay time, using
Time Select Dial to 5
minutes.
5.
4.
• Press
Start
.
Delay time will
count down. Then
cooking will start.
Press 5 times
Press 5 times
3.
• Press
Timer/Clock
.
4.
• Set stand time, using
Time Select Dial to 5
minutes.
5.
• Press
Start
.
Cooking will start.
After cooking, stand
time will count down
without oven
operating.
Time Dial
Rotate
Time Dial
Rotate
Time Dial
Rotate
Time Dial
Rotate
Time Dial
Rotate
IP1813_38X00CP_14_080327
2008.3.27
14:25
Page 23