Panasonic PT-52LCX65 Multi Media Display - Page 29

Automatic program setting Automatically searches and adds receivable channels to memory. Press MENU to display the Main Menu screen. 4 CH VOL OK VOL CH 1 CH VOL OK VOL CH Press to select "Setup" icon. Press to display the Setup menu. Picture Audio Timer Lock Memory Card Setup 5 CH VOL OK VOL CH Press to select "ANT In". Press to select "Antenna" or "Cable". Auto program ANT In ◄ Cable ► Mode All Start scan Press to select "Mode". Press to select "All" or "Analog". Auto program ANT In Cable Mode ◄ All ► Start scan Basic Operation 2 CH VOL OK VOL CH 3 CH VOL OK VOL CH Press to select "Program channel". Press to display the Program channel menu. Setup CH scan All Language Program channel Input labels CC Other adjust Press to select "Auto". 6 CH VOL OK VOL CH Press to select "Start scan". Press to start Scan. Now scanning analog channel ... Progress 7 After Auto program is complete, the unit will return to Manual program mode. To place the channels that were located by auto scan in memory, move the cursor to "Apply" and press OK. (pp. 30-31). If OK is not pressed after selecting OK, the channels will not be memorized. Press to enter the Auto menu. Program channel Auto Manual Signal meter Notes: • If "Cable" or "Antenna" is selected and a CableCARDTM is not inserted, Auto program will perform Scan All. • If "Cable" is selected and a CableCARD™ is inserted, Auto scan will not be available. • Some channels with very weak signals may be locked into memory. If desired, these channels can be deleted manually using the "Manual program setting". (p. 30) • "Auto program" must be done when you select the input signal for the first time or whenever you change the antenna configuration. 29