Panasonic PT AE700U Lcd Projector
Panasonic PT AE700U - High-Definition Home Cinema LCD Projector Manual
 |
UPC - 410000150467
View all Panasonic PT AE700U manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic PT AE700U manual content summary:
- Panasonic PT AE700U | Lcd Projector - Page 1
ENGLISH R LCD Projector Operating Instructions Model No. PT-AE700U Before operating this product, please read the instructions carefully and save this manual for future use. For assistance, please call : 1-888-View-PTV(843-9788) or send e-mail to : [email protected] or visit us at - Panasonic PT AE700U | Lcd Projector - Page 2
below and retain this booklet in case service is required. Model number: PT-AE700U Serial number: IMPORTANT SAFETY NOTICE WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Power Supply: This LCD Projector is designed to operate on 100 V - 240 - Panasonic PT AE700U | Lcd Projector - Page 3
cabinet is broken, disconnect the power cord plug from the wall outlet. B Continued use of the projector in this condition may result in fire or electric shocks. B Contact an Authorized Service Center for repairs. Do not overload the wall outlet. B If the power supply is overloaded (for example, by - Panasonic PT AE700U | Lcd Projector - Page 4
, do not touch the projector or the cable. B Electric shocks can result. 6-ENGLISH Do not use the projector in a bath or shower. B Fire or electric shocks can result. Do not look into the lens while the projector is being used. B Strong light is emitted from the projector's lens. If you look - Panasonic PT AE700U | Lcd Projector - Page 5
Check that all of the accessories shown below have been included with your projector. Remote control unit (N2QAEA000025 x1) Video cable [3.0 m (9´10˝), K2KA2FA00003 x1] AAA batteries for remote control unit (x2) Power cord (K2CG3FR00001 x 1) Before use Cautions regarding setting-up Avoid - Panasonic PT AE700U | Lcd Projector - Page 6
with very high precision technology to provide fine picture details. Occasionally, a few non-active pixels may appear on the screen as fixed points of blue, green or red. Please note that this does not affect the performance of your LCD. 10-ENGLISH Location and function of each part Projector - Panasonic PT AE700U | Lcd Projector - Page 7
here. Do not use any power cord other than the accessory power cord. & Security lock This can be used to connect a commercially-available theft-prevention cable (manufactured by Kensington). This security lock is compatible with the Microsaver Security System from Kensington. ' Lamp unit cover (page - Panasonic PT AE700U | Lcd Projector - Page 8
when it is time to replace the lamp unit. It flashes if a circuit abnormality is detected. % TEMP indicator (page 48) This indicator illuminates if an abnormally high temperature is detected inside the projector. If the temperature rises above a certain level, the power supply will be turned off - Panasonic PT AE700U | Lcd Projector - Page 9
You will need to purchase the separate ceiling bracket (ET-PKE700) when using the ceiling installation method. B If you set up the projector vertically, it may cause damage to the projector. B It is recommended that you set up the projector in a place that is tilted at less than ±30°. Setting up the - Panasonic PT AE700U | Lcd Projector - Page 10
Setting up range using the lens shift function This projector can be placed in various places by controlling the shift lever at the front side of the projector to move the lens in order to adjust the position of the projected image. BHorizontal lens shift About 25% of the About 25% of the - Panasonic PT AE700U | Lcd Projector - Page 11
Getting started Connections Notes on connections B Read the instruction manual for each peripheral device carefully before connecting it. B Turn off the power supply for all peripheral devices before making any connections. B If the cables necessary for connection are not included with the - Panasonic PT AE700U | Lcd Projector - Page 12
so that the polarities are correct, and light sources as possible. B If facing the remote control unit toward the screen to operate the projector, the operating range of the remote control unit will be limited by the amount of light reflection loss caused by the characteristics of the screen used - Panasonic PT AE700U | Lcd Projector - Page 13
. 2. Connect the accessory power cord. 3. Remove the lens cover. ˛$ ˛# ˛& Power cord ˛( ˛* Power indicator ˛' ˛) ˛( Lens cover #Press the MAIN POWER switch to turn on the power. BThe power indicator on the projector will illuminate red. $Press the POWER button. BThe power indicator on the - Panasonic PT AE700U | Lcd Projector - Page 14
to increase a little. B By using the "OPTION" menu to set "LAMP POWER" to "LOW", the operating sound of the fan can be reduced. (Refer to page 47.) B You can also turn off the power by pressing the POWER button twice or by holding it down for at least 0.5 seconds. B When the projector is in standby - Panasonic PT AE700U | Lcd Projector - Page 15
image sources. DYNAMIC ...........When the projector is used in a bright room. CINEMA1 When watching movies. The lights (LIGHT) Press the LIGHT button. B The buttons on the remote control unit will be illuminated. B Press the LIGHT button again to turn off the button lights. The button lights - Panasonic PT AE700U | Lcd Projector - Page 16
mode does not match the aspect ratio of the input signal, it may affect the quality of viewing of the original picture. B If using this projector in places such as cafes or hotels to display programs for a commercial purpose or for public presentation, note that if the aspect ratio selection - Panasonic PT AE700U | Lcd Projector - Page 17
, the settings will switch automatically to the last "PROFILE" settings that were used for the selected picture mode. B When retrieving a profile, "EDIT" will button,and then repeat the steps from step #. CURSOR A COLOR 0 TINT 0 BRIGHT +2 SELECT ADJ ESC B ˛C ˛D Screen & Press the MENU - Panasonic PT AE700U | Lcd Projector - Page 18
TINT PT.1 0 0 PT.2 -1 0 PT.3 0 +10 PT.4 -10 +10 PT.5 -6 +5 PT.6 +3 -3 PT.7 0 +7 PT.8 -1 +14 SELECT ENTER BRIGHT flash red while saving the settings. NOTE: B Do not turn off the power " setting to "NORMAL" manually. B When the "COLOR adjusted picture settings using the "MEMORY - Panasonic PT AE700U | Lcd Projector - Page 19
and adjustments for this projector can be carried BRIGHT 0 COLOR 0 TINT 0 SHARPNESS 0 COLOR TEMP. 0 DYNAMIC IRIS ON ADVANCE MENU MEMORY SAVE MEMORY LOAD TV-SYSTEM BACK COLOR BLUE WSS ON FRONT/REAR FRONT DESK/CEILING DESK FAN CONTROL NORMAL LAMP POWER HIGH LAMP RUNTIME 5H - Panasonic PT AE700U | Lcd Projector - Page 20
blue. NOTE: B Press the MENU button to return to the previous screen. 38-ENGLISH % Press the ENTER button to accept the selection. PICTURE PICTURE MODE NORMAL CONTRAST 0 BRIGHT 0 COLOR 0 TINT 0 SHARPNESS 0 COLOR TEMP. 0 DYNAMIC IRIS ON ADVANCE MENU MEMORY SAVE MEMORY LOAD TV - Panasonic PT AE700U | Lcd Projector - Page 21
. Press the ENTER button to display the "ADVANCE MENU" ADVANCE MENU GAMMA HIGH 0 GAMMA MID 0 GAMMA LOW 0 CONTRAST R 0 CONTRAST G 0 CONTRAST B 0 BRIGHT R 0 BRIGHT G 0 BRIGHT B 0 COLOR MNGMT SELECT ENTER ESC GAMMA HIGH/MID/LOW These items are for adjusting the gradation of the - Panasonic PT AE700U | Lcd Projector - Page 22
Refer to page 35 on how to retrieve the saved settings. TV-SYSTEM (S-VIDEO/VIDEO only) TV-SYSTEM AUTO [ NTSC [ NTSC4.43 [ PAL [ PAL-M manually to the required TV system. NOTE: B When set to "AUTO", the projector "LAMP POWER" in the "OPTION" menu, and then press the I or H button to - Panasonic PT AE700U | Lcd Projector - Page 23
for short periods of time. The projector uses less power in "SHUTTER" mode than it does in normal projection mode. # Select "SHUTTER" from the "MAIN MENU" and then press the ENTER button. $ Press any button on either the projector or remote control unit (except the LIGHT button) to return to normal - Panasonic PT AE700U | Lcd Projector - Page 24
CONTROL NORMAL [ HIGH Set "FAN CONTROL" to "HIGH", when using this projector at high elevations (above 1 400 m) only. LAMP POWER LAMP POWER HIGH [ LOW This setting changes the lamp brightness. When set to "LOW", the luminance of the lamp is reduced, but the projector uses less power, and the - Panasonic PT AE700U | Lcd Projector - Page 25
indicator Indicator display Illuminated (red) It is nearly time to Problem replace the lamp unit. Flashing (red) An abnormality has been detected in the lamp circuit. B Does "REPLACE Possible cause LAMP" appear on the screen after the projector is turned on? B The power may have been turned - Panasonic PT AE700U | Lcd Projector - Page 26
would be taken with a fluorescent light. B A Phillips screwdriver is necessary for removing the lamp unit. NOTE: B The projector is not supplied with a replacement lamp unit. Please ask your dealer for details. Lamp unit product no.: ET-LAE700 CAUTION: B Do not use any lamp unit other than the one - Panasonic PT AE700U | Lcd Projector - Page 27
become shorter according to the settings of the projector. Lamp unit replacement procedure NOTE: B If the lamp usage time has passed 3 000 hours (when "LAMP POWER" has been set to "HIGH" and when "DYNAMIC IRIS" has been set to "ON"), the projector will switch to standby mode after approximately 30 - Panasonic PT AE700U | Lcd Projector - Page 28
for service, check the following points. Problem Possible cause Page Power does not B The power cord may not be connected. - turn on. B The MAIN POWER switch is turned off. - B The main power supply is not being supplied to the - wall outlet. B TEMP indicator is illuminated or flashing - Panasonic PT AE700U | Lcd Projector - Page 29
TTL high impedance, automatic positive/negative polarity compatible 56-ENGLISH COMPONENT IN: Y, PB/CB, PR/CR Y: PB,PR (CB,CR): HDMI IN: TRIGGER out: Cabinet: Dimensions: Width: Height: Length: Weight: Operating environment: Temperature: Humidity: Certifications: Power supply - Panasonic PT AE700U | Lcd Projector - Page 30
the resolution indicates an interlaced signal. *2 The following symbols are used to indicate picture quality. AA Maximum picture quality can be obtained COLOR TINT PT.1 0 0 PT.2 -1 0 PT.3 0 +10 PT.4 -10 +10 PT.5 -6 +5 PT.6 +3 -3 PT.7 0 +7 PT.8 -1 +14 SELECT ENTER BRIGHT +4 - Panasonic PT AE700U | Lcd Projector - Page 31
SH Projection dimensions calculation methods Dimensions such as projection distances can be calculated from the screen diagonal length. (Units for calculations: m) 16:9 SD LW/LT SW Screen Width: SW=SDx0.872 Screen Height: SH=SDx0.490 Minimum Projection Distance: LW=1.2244xSD-0.056 Maximum - Panasonic PT AE700U | Lcd Projector - Page 32
Standards Association. B HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. All other trademarks are the property of the various trademark owners. 62-ENGLISH These Operating Instructions are printed on recycled paper.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
ENGLISH
TQBJ 0161-1
LCD Projector
Operating Instructions
Model No.
PT-AE700U
R
Before operating this product, please read the instructions carefully and save this
manual for future use.
For assistance, please call : 1-888-View-PTV(843-9788)
or send e-mail to : [email protected]
or visit us at www.panasonic.com
(U.S.A)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.co.jp/global/
(Puerto Rico)