Panasonic PT-LB90NTU Lcd Projector
Panasonic PT-LB90NTU - LCD XGA 4:3 3500 Lumens Wrls Enet 6.5LBS Manual
 |
UPC - 791871112052
View all Panasonic PT-LB90NTU manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic PT-LB90NTU manual content summary:
- Panasonic PT-LB90NTU | Lcd Projector - Page 1
Operating Instructions LCD Projector Commercial Use Model No. PT-LB90NTU PT-LB90U PT-LB78VU PT-LB75VU Thank you for purchasing a Panasonic Projector. JJ Before operating this product, please read the instructions carefully, and save this manual for future use. Before using your projector, be sure to - Panasonic PT-LB90NTU | Lcd Projector - Page 2
you will be pleased with your Panasonic LCD projector. The serial number of your product may be found on its bottom. You should note it in the space provided below and retain this booklet in case service is required. Model number: PT-LB90NTU/PT-LB90U/PT-LB78VU/PT-LB75VU Serial number: WARNING: TO - Panasonic PT-LB90NTU | Lcd Projector - Page 3
equipment and shall be easily accessible. Declaration of Conformity Model Number: PT-LB90NTU/PT-LB90U/PT-LB78VU/PT-LB75VU Trade Name: Panasonic Responsible party: Panasonic Corporation of North America Address: One Panasonic Way, Secaucus, New Jersey 07094 Telephone number: (888) 411 - 1996 - Panasonic PT-LB90NTU | Lcd Projector - Page 4
4.0 W (PT-LB80NTU) Approx. 0.9 W (PT-LB90NTU) (Standby mode: In "ECO") JJQuick steps For details, see the corresponding pages. 1. Set up your projector. (Æpage 15 Your Projector 12 Projector body 12 Remote control 14 Getting Started Setting up 15 Screen size and throw distance 15 Projection - Panasonic PT-LB90NTU | Lcd Projector - Page 5
DEVICE SETUP 44 NETWORK menu (PT-LB90NTU only 45 Maintenance LAMP and TEMP Indicators 46 Managing the indicated problems 46 Care and Replacement 47 Before Care and Replacement 47 Cleaning the projector 47 Replacing the Lamp unit 48 Troubleshooting 51 Appendix Technical Information 52 List - Panasonic PT-LB90NTU | Lcd Projector - Page 6
problems occur. If the followings problems occur, cut off the power supply immediately. Continued use of the projector bundle. Ask an Authorized Service Center to carry out any ceiling mount brackets) may cause the projector which is mounted on the ceiling to fall down. Do not install this projector - Panasonic PT-LB90NTU | Lcd Projector - Page 7
explosions can result if this is not done. zzWhen replacing the lamp, allow it to cool for at least one hour before handling it otherwise it can cause burns. Do not allow infants or pets to touch the remote control unit. zzKeep the remote control unit out of the reach of infants and pets - Panasonic PT-LB90NTU | Lcd Projector - Page 8
or that the gas has got into your eyes or mouth, seek medical advice immediately. Ask your dealer about replacing the lamp unit and check the inside of the projector. Do not use projectors with the adjustable feet or lens cover removed. If this not observed, the sets will not operate correctly or - Panasonic PT-LB90NTU | Lcd Projector - Page 9
else, this will be magnified and projected onto the screen. „„Do not move the projector while it is operating or subject it to vibration or impact. The service life of its internal components will be shortened. „„The projector has a high pressure mercury lamp that is characterized as follows: zzThe - Panasonic PT-LB90NTU | Lcd Projector - Page 10
to safety Accessories Make sure the following accessories are provided with your projector. Remote control for PT-LB90NTU (×1) (N2QAYB000436) Remote control for PT-LB90U/LB78VU/ LB75VU (×1) (N2QAYB000262) Power cord (×1) (K2CG3DR00008) RGB signal cable (×1) 1.8 m (5'10") (K1HA15DA0002) Power - Panasonic PT-LB90NTU | Lcd Projector - Page 11
from front FRONT/ CEILING Mounting in the ceiling with a ceiling mount bracket (sold separately) and projecting from front REAR/ DESK Setting on a desk/floor and projecting from rear (Translucent screen is required) REAR/ CEILING Mounting in the ceiling with a ceiling mount bracket (sold - Panasonic PT-LB90NTU | Lcd Projector - Page 12
Projector body JJTop and front view Control panel Adjuster button (Æpage 16) Zoom ring Adjust the projection size. (Æpage 23) Focus ring Adjust the focus. (Æpage 23) Remote control signal receptor Ambient Luminance Sensor (ALS) TEMP indicator Indicates the temperature status. (Æpage 46) LAMP - Panasonic PT-LB90NTU | Lcd Projector - Page 13
Adjust the projection angle. (Æpage 16, 23) JJTerminals COMPUTER1 IN COMPUTER2 IN Connect a computer or YPBPR signal cable. (Æpage 18) LAN Connect a network cable. (PT-LB90NTU only) (Æpage 54) SERIAL Connect a computer to control the projector operation. (Æpage 18, 53) S-VIDEO/VIDEO IN Connect - Panasonic PT-LB90NTU | Lcd Projector - Page 14
25) The PAGE buttons are only for PT-LB90NTU. (See CD-ROM contents.) Turn off the projection temporarily. (Æpage 24) Display the frozen image The remote control may malfunction under strong light such as fluorescent. zzYou can operate the projector with the remote control within the remote range - Panasonic PT-LB90NTU | Lcd Projector - Page 15
Note zzFor the best quality of the projection image, install a screen where sunlight or room light does not shine directly onto the screen. Close window shades or curtains to block the light and turn off the lamps. zzDo not use the projector at a raised or a horizontally tilted position. Doing - Panasonic PT-LB90NTU | Lcd Projector - Page 16
Menu INSTALLATION Method FRONT/CEILING JJMounting in the ceiling and projecting from rear (Using translucent screen) Menu INSTALLATION Method REAR/DESK Menu INSTALLATION Method REAR/CEILING Remarks zzWhen mounting the projector in the ceiling, the optional ceiling mount bracket (ET-PKB80) is - Panasonic PT-LB90NTU | Lcd Projector - Page 17
connecting cables that match with the projector and each peripheral device terminal. zzIf the input signal is affected by signal jitter, the projected image may have poor image quality and timebase correction is effective. zzConfirm the type of video signals, see "List of compatible signals - Panasonic PT-LB90NTU | Lcd Projector - Page 18
the CD-ROM contents provided . (PT-LB90NTU only) zzWhen you connect more than one computer, switch the computer connection manually. zzOne RGB cable is provided with the projector. If necessary, prepare commercial connecting cables that match with the projector and each peripheral device terminals - Panasonic PT-LB90NTU | Lcd Projector - Page 19
guide 4 ) Hold the plug and unplug the power cord from the AC IN terminal on the back of the projector. JJDirect power off function You can switch off the electric power supply any time by unplugging the power plug from the wall outlet or by switching off the main power. The internal lamp - Panasonic PT-LB90NTU | Lcd Projector - Page 20
). The power is on and preparing for projection. The projector is projecting. No power supply and the internal fan is cooling the lamp by internal power supply. The power is switched on again while cooling the lamp and recovering to the projection mode. Recovery may take a while. Remarks zzWhen - Panasonic PT-LB90NTU | Lcd Projector - Page 21
with the remote control, you projector starts projecting when the power cord is connected to a wall outlet. (Æpage 39) zzIf the projector is switched on again while the internal cooling fan is still operating by the internal power supply, the display may flicker for the characteristics of the lamp - Panasonic PT-LB90NTU | Lcd Projector - Page 22
return to the projection. 2222 Press the POWER button again. The lamp goes off, the operational sound (beep) sounds, and projection stops. zzThe CONTROL PANEL (when operating with the projector body) or REMOTE CONTROLLER (when operating with the remote control) under CONTROL DEVICE SETUP in the - Panasonic PT-LB90NTU | Lcd Projector - Page 23
and projected automatically when the projector is switched on. (Æpage 37) zzSet the INPUT GUIDE under video tape, etc., to be played. (Æpage 31) zzConfirm the aspect ratio of the screen and image. Select the optimum aspect ratio. (Æpage 33) Positioning the image When setting up the projector - Panasonic PT-LB90NTU | Lcd Projector - Page 24
peration JJNETWORK (PT-LB90NTU only) Press button. Basic Operation Capturing an image You can freeze the projected image and Press the VIDEO button to cycle through the options. S-VIDEO VIDEO Signal input to S-VIDEO IN terminal Signal input to VIDEO IN terminal If INPUT GUIDE under the - Panasonic PT-LB90NTU | Lcd Projector - Page 25
Remote control operation Basic Operation Setting up the image position automatically When a RGB signal is input, the projector adjusts the SHIFT, DOT CLOCK and CLOCK PHASE automatically. Press button. Projecting an image in INDEX-WINDOW mode You can project an image split in 2 windows as an - Panasonic PT-LB90NTU | Lcd Projector - Page 26
. Press button. 1111 Press the MENU button of the control panel or remote control to display the on screen menu (main menu, submenu or detailed FUNCTION BUTTON" in the "PROJECTOR SETUP menu". (Æpage 41) Basic Operation Remarks zzWhen the COMPUTER signal is projected, the enlargement range will - Panasonic PT-LB90NTU | Lcd Projector - Page 27
LANGUAGE DISPLAY OPTION PROJECTOR SETUP SECURITY NETWORK next level will be displayed. **** PT-LB90NTU only Remarks zzPress the MENU or and return to the projection. zzSome items and DEFAULT button of the remote control. Press button. The Adjust each menu item manually. zzThe triangle mark - Panasonic PT-LB90NTU | Lcd Projector - Page 28
on the remote control. PROJECTOR SETUP SECURITY Sub-menu Select the required sub-menu item and press ENTER to display the detailed menu. JJPICTURE [ ] QQ S-VIDEO/VIDEO 31 **** RGB moving images can be projected only when the following signals are input: PT-LB90NTU only) Settings 28 - ENGLISH - Panasonic PT-LB90NTU | Lcd Projector - Page 29
INITIAL START UP INSTALLATION HIGH ALTITUDE MODE STANDBY MODE LAMP POWER LAMP RUNTIME EMULATE FUNCTION BUTTON AUDIO SETTING TEST PATTERN INITIALIZE ALL - OFF - - Page 43 43 43 43 44 44 44 JJNETWORK [ ] (PT-LB90NTU only) For details, see "NETWORK menu". (Æpage 45) Sub-menu item Default WIRED - Panasonic PT-LB90NTU | Lcd Projector - Page 30
the required item from the sub-menu. zzSet the selected item with ◄►buttons. Remote control Control panel COLOR You can adjust the color saturation of the projected image. (Available with signals of S-VIDEO/VIDEO/ RGB (Moving image)/YPBPR only) Lighter Darker PICTURE MODE Depending on the - Panasonic PT-LB90NTU | Lcd Projector - Page 31
normally. zzAUTO is not available when INSTALLATION in PROJECTOR SETUP menu is set to REAR/DESK or REAR/CEILING. STILL MODE You can reduce the vertical flicker when projecting a still image. (Available with signals of S-VIDEO/VIDEO only) Change setting Change setting OFF ON Deactive Active - Panasonic PT-LB90NTU | Lcd Projector - Page 32
. Remote control Control panel REALTIME KEYSTONE If the projector is aligned non-perpendicularly to the screen, or if the projection screen correct the angle of the projection even when the REALTIME KEYSTONE is activated, you can correct the keystone manually. Image Operation Remarks zzYou can - Panasonic PT-LB90NTU | Lcd Projector - Page 33
periphery of the projected image. (Available with signals of S-VIDEO/VIDEO/RGB (Moving image )/YPBPR only) Zoom out Zoom in zzSetting range: 0 to +3 Remarks zzOVER SCAN is not available when network signals are input. ASPECT You can switch the aspect ratio manually - Panasonic PT-LB90NTU | Lcd Projector - Page 34
the image creator. Remarks zzThe order of ASPECT types is defined not only by the input method but also by the input signals. zzIf you project a copyrighted image enlarged or distorted by using ASPECT function in commercial use in a public place, such as a restaurant or hotel, you might infringe on - Panasonic PT-LB90NTU | Lcd Projector - Page 35
language with▲▼buttons and press the ENTER button to set. Remote control Control panel LANGUAGE menu PICTURE POSITION LANGUAGE DISPLAY OPTION PROJECTOR SETUP SECURITY NETWORK PICTURE POSITION LANGUAGE DISPLAY OPTION PROJECTOR SETUP SECURITY NETWORK The set language is highlighted. Settings - Panasonic PT-LB90NTU | Lcd Projector - Page 36
Remote control Control panel ON-SCREEN DISPLAY You can set the on-screen display. Change setting Change setting JJINPUT GUIDE command Panasonic NEC refer to the instructions which were provided set to OFF, use the projector with utmost care due to the video cassette tapes. 36 - ENGLISH Settings - Panasonic PT-LB90NTU | Lcd Projector - Page 37
the projector. Change setting Change setting ON TEXT USER OFF Display "Panasonic" logo Display the original text Display the image registered by user No display when any input signal is projected. BACK COLOR You can choose a BLUE or BLACK screen for when the projector is idle. Change setting - Panasonic PT-LB90NTU | Lcd Projector - Page 38
of the remote control button operations from the sub-menu. JJAUTO SETUP For details, see "Setting up the image position automatically". (Æpage 25) JJFREEZE You can capture the projected image and see it as a still picture. While the image is frozen, the audio sound through the projector will stop - Panasonic PT-LB90NTU | Lcd Projector - Page 39
REAR/DESK from rear (Translucent screen is required) Mounting in the ceiling with a ceiling REAR/CEILING mount bracket (sold separately) and projecting from rear (Translucent screen is required) HIGH ALTITUDE MODE If you use the projector at high elevation, the HIGH ALTITUDE MODE setting need - Panasonic PT-LB90NTU | Lcd Projector - Page 40
red (time indicator) and gray marks appear alternately to notify you of the lamp replacement time. zzThe lamp life varies with its condition of use (number of power-on times, etc. ). EMULATE When the projector is controlled with a computer through serial input terminal, you can change the setting - Panasonic PT-LB90NTU | Lcd Projector - Page 41
". (Æpage 27) 2222 Press and hold the FUNCTION button of the control panel or remote control for at least 3 seconds. QQWhen not using the FUNCTION button 1111 Select DISABLE in this menu (FUNCTION BUTTON in the PROJECTOR SETUP menu). 2222 Press the ENTER button. 3333 Select OK. 4444 Press the ENTER - Panasonic PT-LB90NTU | Lcd Projector - Page 42
. Select OK and turn off the power according to the instruction. (All other buttons are deactivated.) zzThe INITIAL SETTING menu screen will display when the power is connected. (Æpage 11) Remarks zzThe usage time of the projector, lamp runtime and the NETWORK settings are not initialised. zzWhen - Panasonic PT-LB90NTU | Lcd Projector - Page 43
the ENTER button. zzSet the selected item with◄►buttons. Remote control Control panel Note zzPerform the above operation after the your original text to display regularly at the bottom of the projected image while projecting. Change setting Change setting OFF ON Deactive Active TEXT CHANGE - Panasonic PT-LB90NTU | Lcd Projector - Page 44
can enable/disable the button operations of the control panel and remote control. Change setting Change setting OFF ON Unlock the menu control panel and MENU button for at least 2 seconds while the projector is projecting. OK CANCEL 2222 Press▲▼◄►buttons to select OK and press the ENTER - Panasonic PT-LB90NTU | Lcd Projector - Page 45
PT-LB90NTU only) Navigating through the MENU (Æpage 27), select NETWORK from the main menu and then select the required item from the sub-menu. zzSet the selected item with◄►buttons. Remote network, see "NETWORK operation manual" in the CD-ROM users to connect to live mode while the projector - Panasonic PT-LB90NTU | Lcd Projector - Page 46
the projector (Æpage 22) and contact an Authorized Service Center. See "Replacing the Lamp unit". (Æpage 48) Remarks zzIf the LAMP indicator still lights or flashes after the above remedy, contact an Authorized Service Center. JJTEMP indicator Indicator zzIlluminating red while projecting and - Panasonic PT-LB90NTU | Lcd Projector - Page 47
clothes. Failure to observe these may result in altered or damaged surfaces of the projector. JJLens cover Make sure no dirt or dust remains on the surface of the lens cover glass. It will be enlarged and projected onto the screen. Wipe off dirt and dust gently with a lint-free cloth. Do - Panasonic PT-LB90NTU | Lcd Projector - Page 48
horizontally to prevent broken pieces from scattering. When the projector is mounted in the ceiling, do not work directly under the projector or put your face close to the projector, and pull out the lamp horizontally. Note zzPrior to replacing the lamp unit, allow it to cool down to prevent the - Panasonic PT-LB90NTU | Lcd Projector - Page 49
Care and Replacement JJLamp replacement procedure zzWhen the projector is mounted in the ceiling, do not work directly under the projector or put your face close to the projector. zzBe sure to install the lamp unit and attach the lamp unit cover securely. If they are not installed securely, it may - Panasonic PT-LB90NTU | Lcd Projector - Page 50
Care and Replacement 5555 Attach the lamp unit cover and tighten the 2 lamp unit cover fixing screws securely with a Phillips-head screwdriver. 6666 Connect the power cord to a wall outlet. 7777 Press the POWER button and the projection starts. Remarks zzIf INITIAL START UP in the PROJECTOR SETUP - Panasonic PT-LB90NTU | Lcd Projector - Page 51
Troubleshooting Confirm the following problem and cause. Should any problem persist, contact an Authorized Service Center. Problem Cause Page Power does not turn on. No picture appears. The picture is fuzzy. Color is pale or grayish. No sound can be heard from the internal speaker. The remote - Panasonic PT-LB90NTU | Lcd Projector - Page 52
TTeecchnhicnalicInafolrmInatfioonrmation List of compatible signals This projector can project the following image signals. Mode 146.3 B WUXGA 1 920 × 1 200 74.6 59.9 193.3 B VIDEO/S-VIDEO COMPUTER/ YPBPR COMPUTER/ YPBPR COMPUTER **** The "i" appearing after the resolution indicates - Panasonic PT-LB90NTU | Lcd Projector - Page 53
with STX, and proceed to Command, Parameter and end with ETX. You can add the required parameter. Note zzThe projector can not receive any command for 10 seconds after the lamp is switched on. Wait for 10 seconds before sending the command. zzIf sending multiple commands, check if a response has - Panasonic PT-LB90NTU | Lcd Projector - Page 54
063 (Adjustment value 0 - 63) Parameter: VID = VIDEO SVD = S-VIDEO RG1 = COMPUTER 1 IN RG2 = COMPUTER 2 IN NWP = NETWORK (PT-LB90NTU only) Call back: 0 = Standby 1 = Lamp on control active 2 = Lamp on 3 = Lamp off control active Turning off the projection and sound temporarily. Send the - Panasonic PT-LB90NTU | Lcd Projector - Page 55
Display method 3 transparent LCD panels (RGB) Drive method Active matrix method Pixels 786 432 (1 024 × 768) × 3 panels Lens Manual zoom (1.2×)/Manual focus F 1.65 - 1.93, f 18.53 mm - 22.18 mm Lamp UHM lamp (220 W) Luminosity *1 3 500 lm (PT-LB90NTU/LB90U) 3 000 lm (PT-LB78VU) 2 600 lm - Panasonic PT-LB90NTU | Lcd Projector - Page 56
PT-LB90NTU only) Cabinet Compatible Wireless channel Distance Dimensions Weight Operating environment Certifications Power supply Operating range Remote control Weight Dimensions Options Ceiling zzLength: 233 mm (9 1/8") (not including surface projection parts) Approx. 2.96 kg (6.6 lbs.) *3 - Panasonic PT-LB90NTU | Lcd Projector - Page 57
period, the manufacturer is not responsible for any hazard or damage caused by using a ceiling mount bracket which is not purchased from an authorized distributors, or environmental conditions. zzRemove an unused ceiling mount bracket promptly. zzMake sure to use a torque driver and do not use an - Panasonic PT-LB90NTU | Lcd Projector - Page 58
Trademark acknowledgements zzVGA and XGA are trademarks of International Business Machines Corporation. zzS-VGA is a registered trademark of the Video Electronics Standards Association. zzHDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI - Panasonic PT-LB90NTU | Lcd Projector - Page 59
32 Power cord 19 POWER indicator status 20 POWER LOCK indicator status......20 Projection method 16 Projector body 12 PROJECTOR SETUP menu..........39 R Read this first 11 REALTIME KEYSTONE 32 Remote control 14 Replacing the Lamp unit 48 RGB/YPBPR 31 S Screen size and throw distance.....15 - Panasonic PT-LB90NTU | Lcd Projector - Page 60
satisfait de votre projecteur LCD Panasonic. Le numéro de série de votre produit se trouve sous le projecteur. Veuillez le noter dans l'espace ci-dessous prévu à cet effet et conserver cette notice en cas de maintenance requise. Numéro de modèle: PT-LB90NTU/PT-LB90U/PT-LB78VU/PT-LB75VU Numéro de - Panasonic PT-LB90NTU | Lcd Projector - Page 61
s'il n'est pas installé et utilisé conformément aux instructions fournies avec celuici, peut provoquer des interférences nuisibles aux PT-LB90NTU/PT-LB90U/PT-LB78VU/PT-LB75VU Désignation commerciale: Panasonic Fabricant responsable: Panasonic Corporation of North America Adresse: One Panasonic - Panasonic PT-LB90NTU | Lcd Projector - Page 62
d'entraîner une chute du projecteur en cas d'installation au plafond. Ne pas installer ce projecteur dans un endroit qui n'est pas assez résistant pour supporter le poids du projecteur ou sur une surface en pente ou instable. Cela peut faire tomber le projecteur ou le faire basculer, ce qui peut - Panasonic PT-LB90NTU | Lcd Projector - Page 63
veiller à débrancher la fiche du cordon d'alimentation de la prise de courant. Il y a risque d'électrocution ou d'explosion. zzLors du remplacement de la lampe, la laisser refroidir pendant au moins une heure avant de la manipuler, sinon il y a des risques de brûlures. Ne pas laisser des enfants ou - Panasonic PT-LB90NTU | Lcd Projector - Page 64
médecin immédiatement. S'adresser au revendeur pour le remplacement de la lampe et l'inspection de l'intérieur du projecteur. Ne pas utiliser des mise au point de l'objectif dans la période initiale après la mise en service du projecteur. L'objectif du projecteur à clarté élevée est affecté sur le - Panasonic PT-LB90NTU | Lcd Projector - Page 65
d'affilée affectera considérablement sa durée de vie. Prévoir une lampe de remplacement. „„Connexion à un appareil externe Lors de la connexion du zzL'interférence ou l'arrêt de ce produit par un tiers malintentionné. „„Instructions de sécurité zzLe réseau de connexion doit être sécurisé par un - Panasonic PT-LB90NTU | Lcd Projector - Page 66
car elle contient du verre. Si elle tombe ou qu'elle reçoit un choc, elle pourrait s'endommager ou éclater. zzSi vous souhaitez jeter la lampe usagée, veuillez vous renseigner auprès des autorités locales compétentes ou de votre distributeur pour connaître la bonne méthode. zzPréparer un tournevis - Panasonic PT-LB90NTU | Lcd Projector - Page 67
touche que la touche ALIMENTATION, l'écran DURÉE DE LA LAMPE disparaît et la durée de la lampe n'est pas réinitialisée. (Répéter à partir de l'étape 8). 11111 Appuyer sur la touche ALIMENTATION. zzUne fois que la lampe est éteinte, la projection s'arrête et la touche ALIMENTATION s'allume en rouge - Panasonic PT-LB90NTU | Lcd Projector - Page 68
NOTE: This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. F1009-1109B TQBJ0302
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
 |
 |
Operating Instructions
LCD Projector
Commercial Use
Thank you for purchasing a Panasonic Projector.
Before operating this product, please read the instructions carefully, and save this manual
J
for future use.
Before using your projector, be sure to read “Precautions with regard to safety”
(pages 6 - 10).
TQBJ0302
E
NGLISH
Model No.
PT-LB90NTU
PT-LB90U
PT-LB78VU
PT-LB75VU