Panasonic PT50LCZ7 Lifi Hdtv - Page 56
Other Information, Operating Peripheral Equipment
View all Panasonic PT50LCZ7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Operating Peripheral Equipment ■ If the equipment does not operate with the remote control • When your equipment has a single code → Input the remote control code again • When your equipment has multiple codes → Change the code with step 4 and test again ■ Return to the TV mode Press TV. Caution • Registration will fail if the wrong code is input or it takes more than 30 seconds to register. You can operate other manufacturers' equipment using this Projection Display's remote control. Procedure 1. Connect the external equipment to the Projection Display and Power Off the external equipment. 2. Press POWER and OK simultaneously for more than 3 seconds. • Release the buttons when the equipment selection buttons start flashing. 3. Select the equipment with the equipment selection button (VCR, DBS/CBL, DVD). • The selected button remains lit (other buttons are not lit). 4. Press the NUMBER keys to input the equipment's 4-digit remote control code. (p. 58-60) 5. Press POWER to operate the equipment with the remote control. (p. 57) • The external equipment turns On. To find a code not listed in the code list This procedure searches all codes and is called the "sequence method." Procedure 1. After step 3, press ► and POWER to change the code and test. • Operate the equipment with the remote control. (p. 57) • Repeat until the code is found. • It may take many attempts before the correct code is found. 2 When the correct code is found, press OK. 56