Panasonic PVGS31D Digital Video Camera - Page 16

Before Using Charging Time and Available Recording Time Supplied battery A (PV-GS19/PV-GS31) B CGR-DU06 (7.2 V / 640 mAh) C Supplied battery A (PV-GS35) B CGA-DU12 (7.2 V / 1 150 mAh) C A CGA-DU21 B (7.2 V / 2 040 mAh) C 1 h 40 min. 1 h 45 min. (1 h 25 min.) 55 min. (45 min.) 2 h 25 min. 3 h 10 min. (2 h 35 min.) 1 h 35 min. (1 h 20 min.) 3 h 55 min. 5 h 30 min. (4 h 30 min.) 2 h 45 min. (2 h 15 min.) A Charging Time B Maximum Continuous Recording Time C Intermittent Recordable Time (The intermittent recordable time refers to recordable time when the recording and stopping operations are repeated.) • "1 h 40 min." indicates 1 hour and 40 minutes. • Battery CGR-DU06 (PV-GS19/PV-GS31) or CGA-DU12 (PV-GS35) is supplied. • The times shown in the table are approximate times. The numbers indicate the recording time when the Viewfinder is used. The numbers in parentheses indicate the recording time when the LCD Monitor is used. In actual use, the available recording time may be shorter. • The times shown in the table are for continuous recording at a temperature of 68 °F (25 °C) and humidity of 60 %. If the Battery is charged at a higher or lower temperature, the charging time may be longer. • We recommend the Battery Pack CGA-DU12 and CGA-DU21 for long time recording (2 hours or more for continuous recording, 1 hour or more for intermittent recording.) • The available recording time becomes shorter if you use both of Viewfinder and LCD Monitor simultaneously when rotating the LCD Monitor forward to record yourself. • The batteries heat up after use or charging. The Camcorder being used will also heat up. This is normal. How to remove the Sensor tag 1 Detach the end of the Grip Belt. 2 Remove the Sensor tag. Then, replace the Grip Belt. To Use as a Grip Belt Adjust the length of the Grip Belt to the size of your hand. 1 Detach the end of the Grip Belt. 2 Adjust the length of the Grip Belt to the size of your hand. 3 Reattach the Grip Belt. Re-attaching the Lens Cap To protect the Lens surface, attach the Lens Cap. • The Lens Cap and Lens Cap Cord come preattached to the Grip Belt. 1 Pass one end of the Lens Cap Cord through the attached eye on the Lens Cap. Then pass the Lens Cap through the loop made by itself and pull tight. 16 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo