Panasonic SA-C600 Basic Owners Manual - Page 8

Control reference guide This unit (front)          01 Standby/on switch ( ) • Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 02 Top cover • The top cover can slide to the both sides. • The magnet is built-in to keep the top cover closing. • Do not apply too much force to the top cover when sliding it. Doing so may cause malfunction. • Do not leave the top cover open for a prolonged period. Doing so will cause the lens to become dirty. ( 16) 03 Adjust volume • 0 (min) to 100 (max) 04 Headphones jack • When a plug is connected, the speaker output terminals and subwoofer output terminal do not output sound. • Excessive sound pressure from earphones and headphones can cause hearing loss. • Listening at full volume for long periods may damage the user's ears. 05 USB-A terminal (For AV) (5 V 500 mA) • You can connect a USB device to the unit and play back music stored on the USB device. 06 Power indicator • Blue: The unit is on. • Red: The unit is in standby mode with the network standby function. • Off: The unit is in standby mode with no function available. 07 Remote control signal sensor • Reception distance: Within approx. 7 m (23 ft) directly in front • Reception angle: Approx. 30° left and right 08 Touch switches • [SELECT]: Switch the input source ]: Playback operation buttons (e.g. "CD") Stop Pause Skip Search [] [ ] • Press again to resume. [ ][ ] Press and hold [ ] or [ ]. • Each time you press the switch, a beep sound will be heard. 09 Display • Input source, clock, playback status, etc. are displayed. 08 (08)