Panasonic SAPM18 SAPM16 User Guide - Page 27

Specifications AMPLIFIER SECTION SC-PM18 Power output 10% Total harmonic distortion 60 Hz-3 kHz, both channels driven (Low channel) 25 W per channel (6 Ω) 3 kHz-16 kHz, both channels driven (High channel) 25 W per channel (6 Ω) Total Bi-Amp power 50 W per channel Power output 10% Total harmonic distortion 1 kHz, both channels driven (Low channel) 30 W per channel (6 Ω) 8 kHz, both channels driven (High channel) 30 W per channel (6 Ω) Total Bi-Amp power 60 W per channel Input sensitivity AUX 250 mV Input Impedance AUX 19.8 kΩ AMPLIFIER SECTION SC-PM16 Power output 10% Total harmonic distortion 60 Hz-3 kHz, both channels driven (Low channel) 20 W per channel (6 Ω) 3 kHz-16 kHz, both channels driven (High channel) 20 W per channel (6 Ω) Total Bi-Amp power 40 W per channel Power output 10% Total harmonic distortion 1 kHz, both channels driven (Low channel) 25 W per channel (6 Ω) 8 kHz, both channels driven (High channel) 25 W per channel (6 Ω) Total Bi-Amp power 50 W per channel Input sensitivity AUX 250 mV Input Impedance AUX 19.8 kΩ FM TUNER SECTION Frequency range 87.9 - 107.9 MHz (200 kHz steps) 87.5 - 108.0 MHz (100 kHz steps) Sensitivity 2.5 µV (IHF) S/N 26 dB 2.4 µV Antenna terminal(s) 75 Ω (unbalanced) AM TUNER SECTION Frequency range Sensitivity S/N 20 dB (at 999 kHz) 520 - 1710 kHz (10 kHz steps) 560 µV/m CASSETTE DECK SECTION Track system 4 track, 2 channel Heads Record/playback Solid permalloy head Erasure Double gap ferrite head Motor DC servo motor Recording system AC bias 100 kHz Erasing system AC erase 100 kHz Tape speed 4.8 cm/s (17/8 ips) Overall frequency response (+3 dB, -6 dB at DECK OUT) NORMAL (TYPE I) 35 Hz - 14 kHz S/N 50 dB (A weighted) Wow and flutter 0.18% (WRMS) Fast forward and rewind time Approx. 120 seconds with C-60 cassette tape Listening operations CD SECTION Sampling frequency Decoding Beam source/wavelength Number of channels Frequency response Wow and flutter Digital filter D/A converter 44.1 kHz 16 bit linear Semiconductor laser/780 nm Stereo 20 Hz-20 kHz (+1, -2 dB) Below measurable limit 8 fs MASH (1 bit DAC) SPEAKER SECTION Type Speaker(s) Woofer Tweeter Impedance HIGH LOW Input power HIGH LOW Output sound pressure level Cross over frequency Frequency range Dimensions (WxHxD) Mass GENERAL Power supply Power consumption Dimensions (WxHxD) Mass 2 way 2 speaker system 10 cm (4˝) cone type 6 cm (23/8˝) cone type 6Ω 6 Ω SC-PM18 60 W (Music) SC-PM16 50 W (Music) SC-PM18 60 W (Music) SC-PM16 50 W (Music) 80 dB/W (1.0 m) 2.5 kHz 55 Hz-22 kHz (-16 dB) 70 Hz-20 kHz (-10 dB) 128 x 250 x 222 mm (51/32˝ x 927/32˝ x 83/4˝) 1.9 kg (4.2 lb.) AC 120 V, 60 Hz 105 W 179 x 247 x 378 mm (71/16˝ x 923/32˝ x 147/8˝) 5.25 kg (11.7 lb.) Power consumption in standby mode: 0.45W Notes: 1. Specifications are subject to change without notice. Mass and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. 3. The labels "HIGH (HF)" and "LOW (LF)" on the rear of the speakers refer to High frequency and Low frequency. Reference 27 RQT6683