Panasonic SC-ZT2s Operating Instructions
Panasonic SC-ZT2s Manual
 |
View all Panasonic SC-ZT2s manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic SC-ZT2s manual content summary:
- Panasonic SC-ZT2s | Operating Instructions - Page 1
Instructions Home Theater Audio System Model No. SC-ZT2 If you have any questions contact In the U.S.A. and Puerto Rico: 1-800-211-PANA (7262) In Canada: 1-800-561-5505 For U.S.A. and Puerto Rico only The warranty can be found on page 30. Please register via the Internet at: www.Panasonic - Panasonic SC-ZT2s | Operating Instructions - Page 2
triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Caution • Use the speakers only with the recommended system. Failure to do so can damage the amplifier and speakers, and can cause fire - Panasonic SC-ZT2s | Operating Instructions - Page 3
Home Theater system 4 Supplied accessories 5 Installation 8 Wireless functions 8 Home Theater a second set of equipment that supports HDMI 12 To connect audio equipment Troubleshooting guide 26 Digital signals that can be played on this system 27 Maintenance 27 Glossary 28 Product Service - Panasonic SC-ZT2s | Operating Instructions - Page 4
Setting up your Home Theater system Before use Setting up your Home Theater system Step 1 Installing the speakers (➜ page 8) You can make your preferred setting because speaker cords page 16) Enjoy surround sound with DVDs, TV, and other sources. • Audio is transmitted wirelessly. 㨪ۭ 4 VQT2R70 - Panasonic SC-ZT2s | Operating Instructions - Page 5
speakers, hold the pole and base parts (➜ page 6). Main unit Control guide Main unit (Control box) Front view Standby/on switch (➜ pages 13, 16 headphones (➜ page 25) Display Wireless Link display When PCM signal is being input (Displayed when wireless speakers are properly operating.) or - Panasonic SC-ZT2s | Operating Instructions - Page 6
terminal (➜ pages 9 to 11, 19) Control guide Before use Audio output terminal Audio input terminal (➜ system is automatically turned off when no signal is input and no operation is performed for approx. 30 minutes. Speaker (with built-in amplifier) Pole (mid-high part) Front view [WIRELESS - Panasonic SC-ZT2s | Operating Instructions - Page 7
Control guide/Remote control preparation Before use Remote the manufacturer. Dispose of used batteries according to the manufacturer's instructions. Using the remote control Main unit Remote control signal sensor the transmission window and the system's sensor free from dust. 7 VQT2R70 - Panasonic SC-ZT2s | Operating Instructions - Page 8
Installation Setup example • Aim the front face (with Panasonic logo) of each speaker at the listening-viewing position . • Do not install other equipment directly on or under the main unit. Wireless functions As this system uses a frequency band of 2.4 GHz, the radio waves may be interrupted by - Panasonic SC-ZT2s | Operating Instructions - Page 9
unit Home Theater connections „ ARC (Audio Return Channel) This function was added to HDMI Ver.1.4. This sends digital audio signals from the HDMI input terminal of the TV, etc. to the HDMI output terminal of this system. • For ARC compatibility of the connected TV, see operating instructions of - Panasonic SC-ZT2s | Operating Instructions - Page 10
Home Theater connections Setting for automatically switching the input source to STB When you make the above connection and you use the Panasonic TV (VIERA), you can automatically switch this system player, etc.) • Refer to the operating instructions for the equipment you are connecting for the - Panasonic SC-ZT2s | Operating Instructions - Page 11
video cable, refer to the operating instructions for the equipment you are connecting. TV system is in standby mode. VIDEO IN AUDIO IN Main unit Connecting the optical fiber cable Insert the cable so its shape fits correctly into the terminal. Do not bend! Video cable Audio cable Home Theater - Panasonic SC-ZT2s | Operating Instructions - Page 12
the appropriate operating instructions. Stereo connection cable (not included) To connect a second set of equipment that supports HDMI ✽ See page 9 for connecting this system to TV. Main unit HDMI Video/Audio out Blu-ray Disc player/ DVD recorder, etc. Connection Home Theater connections/AC - Panasonic SC-ZT2s | Operating Instructions - Page 13
that all equipment has been turned off. (When the VIERA Link "HDAVI Control" compatible Panasonic TV (VIERA) and Blu-ray Disc player/DVD recorder (DIGA) are connected, do 3 and 4. • If the [WIRELESS LINK] indicator does not change from red to green, see page 27 of "Troubleshooting guide". 13 VQT2R70 - Panasonic SC-ZT2s | Operating Instructions - Page 14
speakers enter Standby (In Standby condition). Wireless Link Standby: approx. 0.8 W (per 1 speaker) In Standby condition: more dynamic surround playback with this system by installing Panasonic surround speakers SB-ZT1/SB-ZT2. Setup example Front speaker ( - Panasonic SC-ZT2s | Operating Instructions - Page 15
wirelessly first and then make the settings for the surround speakers. Preparations • Make sure that all equipment has been turned off. (When the VIERA Link "HDAVI Control" compatible Panasonic the [WIRELESS LINK] indicator does not change from red to green, see page 27 of "Troubleshooting guide". - Panasonic SC-ZT2s | Operating Instructions - Page 16
are on. (The following are operations when the power is on in Wireless Link Standby.) Aim the remote control toward the signal sensor (➜ page 7) on the main unit of this system. 1 Press this button to turn on the system. Enjoying movies and music 2 To select the source press one of these - Panasonic SC-ZT2s | Operating Instructions - Page 17
Enjoying sound field effects Sound field effects differ depending on input sources. Select the mode you prefer after listening to the actual sound. Dolby Virtual Speaker You can enjoy surround effects as if you were listening to 5.1 channel sources. (Dolby Pro Logic also works for stereo signals of - Panasonic SC-ZT2s | Operating Instructions - Page 18
. • This system supports "HDAVI Control 4" function. "HDAVI Control 4" is the newest standard (current as of January, 2010) for Panasonic's HDAVI Control compatible equipment. This standard is compatible with Panasonic's conventional HDAVI equipment. • Please refer to individual manuals for other - Panasonic SC-ZT2s | Operating Instructions - Page 19
Home Cinema" without turning on the main unit with this system's power button (including the remote control). (The main unit is automatically turned on.) • See operating instructions 1080p output. • It is recommended that you use Panasonic's HDMI cables. (Non-HDMI-compliant cables cannot be - Panasonic SC-ZT2s | Operating Instructions - Page 20
again. To return to the previous display/ To cancel during setting operation (➜ page 21): Press [ RETURN]. Note • Muting is canceled when you switch the system to Standby. • Muting is also canceled when you adjust the volume. Adjusting the bass (woofer part) output When you feel the bass volume is - Panasonic SC-ZT2s | Operating Instructions - Page 21
Adjusting the surround speaker output using the test signal You can make this setting when using the surround speakers. You can adjust the surround speaker volume by outputting the test signal. 1. Press [TEST] to output the test signal. Speaker display L : Front left, R : Front right, RS : Surround - Panasonic SC-ZT2s | Operating Instructions - Page 22
not work in this mode if you have connected through the HDMI terminal. VIERA Link "HDAVI Control" (➜ page 18) will not function when this system is off. 1. Press and hold [-SETUP, OFF] for about 2 seconds. The setting items are displayed. (➜ page 21) 2. Press [w][q] to select "HDMI " and press [OK - Panasonic SC-ZT2s | Operating Instructions - Page 23
"EXIT " and press [OK] to finish the setting. Note • If delaying audio output is not necessary, select "OFF ". • "AUTO " is effective only when connecting the Panasonic TV (VIERA) supporting HDAVI Control 3 and later versions. (Auto Lip Synchronization Function) • When you connect the - Panasonic SC-ZT2s | Operating Instructions - Page 24
the number of speakers to 4" (➜ page 15) are reset. When other equipment (mini component system, AV amp, etc.) manufactured by Panasonic operates with the remote control operations of this system When using this system's remote control, other equipment may operate. In this case, switch this - Panasonic SC-ZT2s | Operating Instructions - Page 25
system, AV amp, etc.) manufactured by Panasonic operates with the remote control operations of this system system's copyright protection technology. • A problem has occurred with the HDMI connection. Try the following to correct the problem system supports WIRELESS Troubleshooting and other information - Panasonic SC-ZT2s | Operating Instructions - Page 26
Troubleshooting guide Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to "Customer Services Directory (United States and Puerto Rico)" on page 30 if you reside in the - Panasonic SC-ZT2s | Operating Instructions - Page 27
that can be played on this system Troubleshooting and other information „ Dolby Digital Blu-ray disc, DVD etc. „ DTS Blu-ray disc, DVD etc. „ PCM (2-channel) CD, DVD audio etc. „ Multi-channel LPCM (Linear PCM) Blu-ray disc, DVD audio etc. „ This system supports 3D, X.V. Color or Deep Color - Panasonic SC-ZT2s | Operating Instructions - Page 28
this system. CPPM Color This system can reproduce Pro Logic This system can process not system uses system Theater Systems) Surround system used in most movie theaters this system. Optical recording compared to this system system even though the system This system supports x.v. system supports system - Panasonic SC-ZT2s | Operating Instructions - Page 29
Servicing - Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing The servicer will require all components to service your system. Therefore, should service ever be necessary, be sure to bring the entire system. - Panasonic SC-ZT2s | Operating Instructions - Page 30
price. The decision to repair, replace or refund will be made by the warrantor. Product or Part Name Audio Products (except items below) DVD Home Theater System 1-800-237-9080 (Fax Only) (Monday-Friday 9am-9pm EST) Panasonic Service and Technology Company 20421 84th Avenue South, Kent, WA 98032 (We - Panasonic SC-ZT2s | Operating Instructions - Page 31
and exclusions may not be applicable. WARRANTY SERVICE FOR PRODUCT OPERATION ASSISTANCE, please contact: Our Customer Care Centre: Telephone #: 1-800 #: Fax #: Email link: (905) 624-5505 1-800-561-5505 (905) 238-2360 "Customer support" on www.panasonic.ca FOR PRODUCT REPAIRS, please locate your - Panasonic SC-ZT2s | Operating Instructions - Page 32
, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there ). Responsible Party: Panasonic Corporation of North America One Panasonic Way Secaucus, NJ 07094 Support Contact: Panasonic Consumer Electronics Company Telephone
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
Operating Instructions
Home Theater Audio System
Model No.
SC-ZT2
VQT2R70
H0110RT0
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read
these instructions carefully.
Before connecting, operating or adjusting this
product, please read the instructions completely.
Please keep this manual for future reference.
PP
For U.S.A. and Puerto Rico only
The warranty can be found on page 30.
Please register via the Internet at:
www.Panasonic.com/register
For Canada only
The warranty can be found on page 31.
If you have any questions contact
In the U.S.A. and Puerto Rico: 1-800-211-PANA (7262)
In Canada:
1-800-561-5505
As an ENERGY STAR
®
Partner
,
Panasonic has determined that this
product meets the ENERGY STAR
®
guidelines for energy efficiency.
For Canada only: The word “Participant” is used in place of
the word “Partner”.
En
Cf
SC-ZT2 Components
SC-ZT2 has 2 system product numbers.
System product number
SC-ZT2PP-K
Main unit (control box part)
SU-ZT2PP-K
Speakers
SB-ZT2PP-K1
System product number
SC-ZT2PP-S
Main unit (control box part)
SU-ZT2PP-KA
Speakers
SB-ZT1PP-S1