Panasonic SC-ZT2s Operating Instructions - Page 13
Speaker setting, Preparations, Connection
View all Panasonic SC-ZT2s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Connection Speaker setting Setting the speakers Make sure to make this setting when using for the first time after purchase. Preparations Make sure that all equipment has been turned off. (When the VIERA Link "HDAVI Control" compatible Panasonic TV (VIERA) and Blu-ray Disc player/DVD recorder (DIGA) are connected, do not turn on the TV (VIERA) and Blu-ray Disc player/DVD recorder (DIGA) until the setting is complete.) Connect the AC power supply cords of main unit and 2 speakers to household AC outlets. (➜ page 12) Make sure that the main unit and speakers have been turned off. Prepare the remote control. (➜ page 7) 1. Turn the main unit on. Press • "2CH SEARCH " appears on the display. (This is displayed only at the first-time setting.) 2. Turn 2 speakers on. [inWdIiRcaEtLoEr SS LINK] Press WIRELESS LINK POWER • The color of the [WIRELESS LINK] indicator changes from red to green. • When the [WIRELESS LINK] indicator of each speaker lights green, "2CH SEARCH " display disappears. When installing surround speakers See "Installing surround speakers" (➜ page 14) and "Setting surround speakers" (➜ page 15). 3. Press and hold [CH] on the remote control for about 3 seconds until "2 SPKR SET " is displayed on the main unit's display. "2 SPKR SET " Always aim the remote control at the main unit for operation. Press and hold (about 3 seconds) 4. Press the remote control button corresponding to the speaker outputting the confirmation sound. Front speaker (left) Front speaker (right) When the sound is output from the front speaker (left), press [GAME]. When the sound is output from the front speaker GAME MUTE (right), press [MUTE]. Speaker setting • Sound is output from either of the speakers. • When you press the button corresponding to the confirmation sound of a speaker, another speaker outputs the confirmation sound. Press the corresponding button in the same way and complete settings for the 2 speakers. • When "COMPLETE " disappears from the main unit's display, the speaker setting is complete. Note • Check if the speakers are properly set after setting the speakers. (➜ page 14) • If the speakers are set incorrectly in step 4, turn the main unit off then on again and perform steps 3 and 4. • If the [WIRELESS LINK] indicator does not change from red to green, see page 27 of "Troubleshooting guide". 13 VQT2R70