Panasonic SDR SW20 Sd Movie Camera - Multi Language - Page 25
Inserting/Removing SD cards (sold separately
View all Panasonic SDR SW20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
3 Setup Inserting/Removing SD cards (sold separately) SD cards are sold separately. Preparations: Set the mode dial to [OFF]. (Check that the status indicator is out.) Inserting or removing an SD card with the power ON may damage the unit and destroy data on the card. 1 Open the card/battery door. Slide the lock to the OPEN side and lift the projection with a finger to open. 2 Insert/Remove the SD card. •To insert: Face the label upwards and slide the card in straight until hearing it catch. •To remove: Press the center of the SD card and pull the card out straight. OPEN Projection Place label upwards. 3 Close the card/battery door. •Press [ ] until hearing the door snap closed. •If the door does not close completely, remove the SD card, check its orientation and reinsert it into the slot. Press here. OPEN Check that the red marker of the lock is no longer visible. ●While the card access lamp is lit, reading, recording, playback, deletion or other processing is being executed. Performing the following operations while the lamp is lit may damage the SD card and its content and the unit may not function properly. • Switching off power • Removing battery or AC adaptor • Opening card/battery door and removing SD card • Rotating the mode dial • Shaking or impacting the unit Card access lamp 25 VQT1M21