Panasonic SDRT50 SDRH85 User Guide - Page 94
Connecting to a PC
View all Panasonic SDRT50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
With a PC Setup 2 Connecting to a PC ≥ Connect this unit to the PC after the software applications are installed. ≥ Remove the supplied CD-ROM from your PC. A USB cable (supplied) 1 Connect this unit to the AC adaptor. ≥ It is possible to use the unit connected to the PC with the batteries only, but you will not be able to write data into the unit. ≥ Use the AC adapter to free you from worrying about the battery running down. 2 Turn on the unit. ≥ This function is available in all modes. ≥ When using the battery, the LCD monitor will be turned off after about 5 seconds. Operating the joystick will cause the LCD monitor to turn on again. 3 Connect this unit to a PC. ≥ Insert the USB connectors as far as they will go. ≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.) ≥ The Smart wizard screen is automatically displayed when VideoCam Suite 3.0 is installed. ≥ This unit is automatically recognized as an external drive of the PC. (l 96) ≥ A USB function selection screen will be displayed if VideoCam Suite 3.0 has not been installed. Use the joystick to select [PC], then press the center of the joystick.When you select an option other than [PC], reconnect the USB cable. 94 VQT2L14 ≥ When Windows is used as the PC operating system, a message prompting to format may display when a SDXC card is read. (Please be aware that if a media is formatted, then all the data recorded on the media will be erased.) http://panasonic.net/avc/sdcard/ information/SDXC.html ≥ When the unit is connected to a PC, its power cannot be turned off. Disconnect the USB cable, before turning this unit off. ≥ Do not disconnect the USB cable or the AC adaptor while the access lamp is on or card access icon ( ) appears on the unit screen. ≥ SDR-T55 / SDR-T50 Do not disconnect the USB cable or the AC adaptor while the access lamp is on or built-in memory access icon ( ) appears on the unit screen. ≥ SDR-H85 Do not disconnect the USB cable or the AC adaptor while the HDD access lamp is on or HDD access icon ( ) appears on the unit screen. ≥ When performing reading/writing between a PC and an SD card, be aware that some SD card slots built into PCs and some SD card readers are not compatible with the SDHC memory card or SDXC memory card.