Panasonic TC20LB30 TC20LB30 User Guide - Page 21

Menu Operations AUDIO ADJUST 1 Press the MENU button to display the MENU screen and select ADJUST. MENU 2 Press to select AUDIO ADJUST. ADJUST SET UP PICTURE PICTURE ADJUST AUDIO AUDIO ADJUST Press to display the AUDIO ADJUST AUDIO ADJUST screen. NORMAL 3 Press to select the sub-menu. MODE BASS AUTO + 5 Select the setting listening to the sound. Press to activate the setting if necessary. TREBLE + 3 BALANCE 0 SURROUND OFF ON EQUALIZER OFF ON STEREO SAP MONO NORMAL/NORMALIZE Select "NORMALIZE" and press "OK" button to return each MODE to the factory default setting. Notes: • "NORMAL" means the MODE is in the factory default setting. "NORMAL" changes to "NORMALIZE" when you change the setting of BASS, TREBLE, BALANCE, SURROUND or EQUALIZER. • You can normalize each MODE separately. MODE MODE DYNAMIC MUSIC AUTO STANDARD Function Gives contrast to sound. For programs consisting mainly of music. Enhances high sounds (around 4 kHz). Automatically adjusts for a wide Dynamic Range. Emits the original sound. BASS, TREBLE, BALANCE, SURROUND, EQUALIZER You can change the level of each sub-menu (BASS, TREBLE, BALANCE, SURROUND and EQUALIZER) for each MODE (AUTO, STANDARD, DYNAMIC and MUSIC) according to your personal preference. Sub-menu Function BASS Adjusts low frequencies. TREBLE Adjusts high frequencies. BALANCE Adjusts left and right volume. SURROUND To enjoy a concert hall effect, select ON when stereo is playing. EQUALIZER Makes voice sound clear. Normally set to ON. STEREO/SAP/MONO Note: • Red display : With signal White display : No signal White display (All modes) : MONO • To change the mode using SAP button (see page 10). MODE STEREO SAP MONO Function Two channel audio reception. Second Audio Programming (typically used for bilingual audio). Select when stereo signal is weak. 21