Panasonic TCL47DT50 TCL47DT50 User Guide - Page 9

Attaching the pedestal to TV Accessories Assembly screws Bracket (1) Cover (1) Base (1) TBL5ZA30091 TBL5ZB30091 TBL5ZX0252 XSS5+15FNK (black) size (M5 x 15) (4) XYN4+F10FJK (black) size (M4 x 10) (4) XYN4+F10FJK (black) size (M4 x 10) (2) (included with Cover) Two people are always required for attachment. ■Preparation for assembly ■Assembling the pedestal Unpack the pedestal and the TV, turn them so that their Attach the Bracket to the protrusion of Neck. front surfaces face down, and put them on a blanket or Make sure that the bracket is anchored before fixing the such other cloth spread out on a workbench or desk. screws. Turn the front side of package to the workbench when Fix securely with assembly screws (4 screws) unpacking the TV. Protrusion of Neck (top) Choose a stable workbench which is larger than the TV and use a clean blanket or cloth which has no dirt or foreign matter on it. Hold the bracket A not to fall over Do not hold the LCD panel when holding the TV. Be careful not to scratch or damage the TV. Bracket ■Set-up Attach the pedestal Align the three tabs on the bracket with the grooves on the back of the TV and insert them. tab Check that the center tab is in the hole, and then slide in the bracket so that the arrow (↓) on the back of the TV is aligned with the arrow (↑) on the bracket. Front Base Tighten assembly screws (total 4 screws) loosely at first, then tighten them firmly to fix securely. Back of the TV Attach the bracket cover Attach the bracket cover and fix securely with assembly screw (total 2 screws). Tighten screws firmly. Set the pedestal ● As shown in the figure, two people should hold the specified portions of the TV, raise and set up the TV. Hold here Back of the TV Cover 9