Panasonic TH-47LFX6 Operating Instructions

Panasonic TH-47LFX6 Manual

Get Panasonic TH-47LFX6 PDF manuals and user guides View all Panasonic TH-47LFX6 manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic TH-47LFX6 manual content summary:

  • Panasonic TH-47LFX6 | Operating Instructions - Page 1
    Operating Instructions (Details) FULL HD LCD Display Model No. TH-47LFX6U TH-47LFX6W English Please read these instructions before operating your set and retain them for future reference.
  • Panasonic TH-47LFX6 | Operating Instructions - Page 2
    , please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the rear cover of these instructions. Visit our Panasonic Web Site http
  • Panasonic TH-47LFX6 | Operating Instructions - Page 3
    Precautions for Installation • Do not install by yourself. Please ask a installation professional or your dealer to install. • This product corresponds to IP44*1 dust and water protection standard. Do not change or damage dust or water resistance of the product. • Please note the dust and water
  • Panasonic TH-47LFX6 | Operating Instructions - Page 4
    in a special environment such as near a swimming pool, hot spring, or ocean, or in a factory uses chemicals or gases, please consult your local Panasonic dealer beforehand. • The product is equipped with cooling fans and air ¿lters that need to be cleaned or replaced if covered with dust. Removing
  • Panasonic TH-47LFX6 | Operating Instructions - Page 5
    inside the product are a risk of electric shock to persons. The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance. WARNING : 1) To prevent electric shock, do not remove cover. No user
  • Panasonic TH-47LFX6 | Operating Instructions - Page 6
    block any ventilation openings. Install in accordance with the manufacturer's instructions. 7) Do not install near any heat sources such as radiators unused for long periods of time. 13) Refer all servicing to quali¿ed service personnel. Servicing is required when the apparatus has been damaged in
  • Panasonic TH-47LFX6 | Operating Instructions - Page 7
    instructions and use only shielded interface cables when connecting to computer or peripheral devices. Any changes or modi¿cations not expressly approved by Panasonic Corp. of North America could void the user's authority to operate this device. FCC Declaration of Conformity Model No. TH-47LFX6U
  • Panasonic TH-47LFX6 | Operating Instructions - Page 8
    not remove cover. No user serviceable parts inside. Refer servicing to quali¿ed service personnel. 3) Do not elds. IMPORTANT: THE MOULDED PLUG (For TH-47LFX6W) FOR YOUR SAFETY, PLEASE READ THE replacement fuse cover can be purchased from your local Panasonic dealer. Do not cut off the mains plug
  • Panasonic TH-47LFX6 | Operating Instructions - Page 9
    Table of Contents Precautions for Installation iii Important Safety Instructions vi FCC STATEMENT vii Important Safety Notice viii Safety Setting (CHANGE PASSWORD Screen 54 Crestron Connected™ page 55 Troubleshooting 57 Applicable Input Signals 59 Shipping condition 60 Speci¿cations 61
  • Panasonic TH-47LFX6 | Operating Instructions - Page 10
    type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Panasonic Corporation.) Replacement Air Filter TY-AF6STD Always be sure to ask a quali¿ed technician to carry out set-up. Small parts can present
  • Panasonic TH-47LFX6 | Operating Instructions - Page 11
    shock. If the power cable is damaged, have it repaired at your local Panasonic dealer. If the Display is not going to be used for any prolonged length other open Àames away from this product at all times. If problems occur during use If a problem occurs (such as no picture or no sound), or if smoke
  • Panasonic TH-47LFX6 | Operating Instructions - Page 12
    . • Do not allow any detergent to come into direct contact with the surface of the Display. If water droplets get inside the unit, operating problems may result. • Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the cabinet surface may be
  • Panasonic TH-47LFX6 | Operating Instructions - Page 13
    Safety Precautions Maintaining air ¿lters The cooling structure of the Display is designed to circulate air taken in from outside inside the Display using fans. Air ¿lters are built into the inlet and outlet. When "Filter" is displayed on the screen as you turn on the power, or when the power
  • Panasonic TH-47LFX6 | Operating Instructions - Page 14
    that you have the accessories and items shown Operating Instruction book Remote Control Transmitter N2QAYB000691 Batteries for the Remote appropriate to your country and region. (see page 8) Panasonic badge An installation professional or service provider will attach it to the Display frame at the
  • Panasonic TH-47LFX6 | Operating Instructions - Page 15
    Accessories Remote Control Batteries Requires two R6 batteries. 1. Pull and hold the hook, then open the battery cover. 2. Insert batteries - note correct polarity ( + and -). 3. Replace the cover. "R6 (UM3, AA)" size - + + - Helpful Hint: For frequent remote control users, replace old
  • Panasonic TH-47LFX6 | Operating Instructions - Page 16
    B or Cable C Cable C Cable B or Cable C Cable C Cable B or Cable C Cable A Cable A (110-127 V AC Compatible) Cable B Cable C Cable D TH-47LFX6U: Cable A Plug Type : A TH-47LFX6W: Cable B Plug Type : SE Cable C Plug Type : BF Cable D Plug Type : O Insulating sleeve Note: Depending on the country of
  • Panasonic TH-47LFX6 | Operating Instructions - Page 17
    Connections How to remove terminal cover A terminal cover is attached to the input and output terminals to protect them from dust and water. To remove the terminal cover to connect a cable or other item, remove all 12 screws from the terminal cover. Opening the terminal cover with some screws left
  • Panasonic TH-47LFX6 | Operating Instructions - Page 18
    Connections Video equipment connection Remove the terminal cover (see page 9) DVI-D IN DVI-D Input Terminal (see page 12) PC IN PC Input Terminal (see page 13) LAN, DIGITAL LINK* Connect to a DIGITAL LINK input terminal network to control the Display. Alternatively, connect to a device that sends
  • Panasonic TH-47LFX6 | Operating Instructions - Page 19
    AUDIO OUT connection Note: Additional equipment and cables shown are not supplied with this set. Connections Stereophonic sound code audio equipment HDMI connection [Pin assignments and signal names] Pin No. Signal Name 1 T.M.D.S Data2+ 2 T.M.D.S Data2 Shield 3 T.M.D.S Data2- 4 T.M.D.S
  • Panasonic TH-47LFX6 | Operating Instructions - Page 20
    Connections DVI-D IN connection PC with DVI-D video out DVI-video cable (Within 5 m) Stereo mini plug (M3) Shared with PC IN. DVI-D Input Connector Pin Layouts Pin No. Signal Name 1 T.M.D.S. data 2- 2 T.M.D.S. data 2+ 24 17 3 T.M.D.S. data 2 shield 4 5 16 9 6 DDC clock 8 1 7 DDC
  • Panasonic TH-47LFX6 | Operating Instructions - Page 21
    PC Input Terminals connection Connections (Female) Conversion adapter (if necessary) COMPUTER RGB Mini D-sub 15p (Male) Connect a cable which matches the audio output terminal on the computer. Audio Stereo mini plug (M3) Shared with DVI-D IN. Notes: • Computer signals which can be input
  • Panasonic TH-47LFX6 | Operating Instructions - Page 22
    command is sent by mistake, this unit will send an "ER401" command back to the computer. • Consult an Authorized Service Center for detail instructions on command usage. Signal names for D-sub 9P connector Pin No. Details 2 R X D 3 T X D 5 GND 4 • 6 Non use 7 8 (Shorted in this set
  • Panasonic TH-47LFX6 | Operating Instructions - Page 23
    audio signals, and these digital signals can be input to the Display via the DIGITAL LINK terminal. Display Connection Terminals Control Computer When a Panasonic ET-YFB100 is used Video Cassette Recorder Computer DVD Player Notes: • When connecting with DIGITAL LINK, be sure to con¿gure each of
  • Panasonic TH-47LFX6 | Operating Instructions - Page 24
    Power On / Off Connecting the AC cord plug to the Display. Remove the terminal cover (See page 9) Connecting the plug to the Wall Outlet Notes: • Main plug types vary between countries. The power plug shown at right may, therefore, not be the type ¿tted to your set. • When disconnecting the AC cord
  • Panasonic TH-47LFX6 | Operating Instructions - Page 25
    Power On / Off When ¿rst switching on the unit Following screen will be displayed when the unit is turned on for the ¿rst time. Select the items with the remote control. Unit buttons are invalid. OSD Language OSD Language 1 Select the language. 2 Set. English (UK) Deutsch Français Italiano
  • Panasonic TH-47LFX6 | Operating Instructions - Page 26
    Selecting the input signal Press to select the input signal to be played back from the equipment which has been connected to the Display. Input signals will change as follows: HDMI PC DVI DIGITAL LINK HDMI: HDMI input terminal in AV IN (HDMI). PC: PC input terminal in PC IN. DVI: DVI input terminal
  • Panasonic TH-47LFX6 | Operating Instructions - Page 27
    Basic Controls Main Unit Remote control sensor Power Indicator The Power Indicator will light. • Power-OFF .... Indicator not illuminated (The unit will still consume some power as long as the power cord is still inserted into the wall outlet.) • Standby ........ Red Orange (When the control
  • Panasonic TH-47LFX6 | Operating Instructions - Page 28
    Basic Controls Remote Control Transmitter ACTION button Press to make selections. ASPECT button Press to adjust the aspect. (see page 21) Standby (ON / OFF) button The Display must ¿rst be plugged into the wall outlet and turned on at the power switch (see page 16). Press this button to turn the
  • Panasonic TH-47LFX6 | Operating Instructions - Page 29
    ASPECT Controls The Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Note: Be aware that if you put the display in a public place for commercial purposes or a public showing and then use the aspect mode select function to shrink or
  • Panasonic TH-47LFX6 | Operating Instructions - Page 30
    Digital Zoom This displays an enlargement of the designated part of the displayed image. 1 Display the operation guide. Press to access Digital Zoom. The operation guide will be displayed. During Digital Zoom, only the following buttons can be operated. [Remote control] Exit 1 POSITION / ACTION
  • Panasonic TH-47LFX6 | Operating Instructions - Page 31
    On-Screen Menu Displays 1 Display the menu screen. Remote Control Press to select. (Example: Picture menu) Unit Press several times. 2 Select the item. Picture Normalise Normal Picture Mode Backlight Contrast Brightness Sharpness White balance Advanced settings Normal 100 70 50 50 Normal (
  • Panasonic TH-47LFX6 | Operating Instructions - Page 32
    synchronizing and image signals are short. • If Auto Setup cannot adjust correctly, select "Normalise" once and press ACTION ( ), then adjust Pos. /Size manually. • If the picture goes off screen in the horizontal direction as a result of performing Auto Setup, perform Dot Clock adjustment. 24
  • Panasonic TH-47LFX6 | Operating Instructions - Page 33
    H-Pos Adjust the horizontal position. Adjusting POS. /SIZE V-Pos Adjust the vertical position. H-Size Adjust the horizontal size. V-Size Adjust the vertical size. Clock Phase (During PC input signal) Eliminate the Àickering and distortion. Dot Clock (During PC input signal) Periodic
  • Panasonic TH-47LFX6 | Operating Instructions - Page 34
    Picture Adjustments 1 Press to display the Picture menu. 2 Select to adjust each item. Press to select the menu to adjust. Select the desired level by looking at the picture behind the menu. Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu
  • Panasonic TH-47LFX6 | Operating Instructions - Page 35
    Picture Adjustments Item Backlight Effect Darker Brighter Adjustments Adjusts luminance of the back light. Contrast* Less Brightness Darker More Brighter Selects the proper brightness and density for the room. Adjusts for easier viewing of dark pictures such as night scenes and black hair.
  • Panasonic TH-47LFX6 | Operating Instructions - Page 36
    Sound Adjustment 1 Press to display the Sound menu. 2 Select to adjust each item. Press to select the menu to adjust. Select the desired level by listening to the sound. Sound Normalise Normal Sound Mode Bass Treble Balance Surround Normal 0 0 0 Off 3 Press to exit from adjust mode. Item
  • Panasonic TH-47LFX6 | Operating Instructions - Page 37
    PRESENT TIME Setup / Set up TIMER The timer can switch the Display On or Off. Before attempting Timer Set, con¿rm the PRESENT TIME and adjust if necessary. Then set POWER ON Time / POWER OFF Time. 1 Press to display the Setup menu. Setup 2/2 MULTI DISPLAY Setup 2 Press to select Set up TIMER
  • Panasonic TH-47LFX6 | Operating Instructions - Page 38
    PRESENT TIME Setup / Setup TIMER Set up TIMER Set the program for turning the power On/Off and select the input signal at the speci¿ed time. Up to 20 programs can be set. [Setting Example] Program 1, Every Monday, 12:00, Power On, Input: HDMI Set up TIMER PRESENT TIME MON 0 : 03 Program 1
  • Panasonic TH-47LFX6 | Operating Instructions - Page 39
    Screensaver (For preventing image retention) Do not display a still picture, especially in 4:3 mode, for any length of time. If the display must remain on, a Screensaver should be used. When the screen saver is operating, the following 5 patterns are displayed full screen for 5 seconds each. Black
  • Panasonic TH-47LFX6 | Operating Instructions - Page 40
    Screensaver (For preventing image retention) Setup of Screensaver Time After selecting Time Designation, Interval or Standby after SCR Saver, the relevant Time Setup will become available for selection and the Operating Time may be set. (Time cannot be set when "Mode" is "On" or "Off".) Press to
  • Panasonic TH-47LFX6 | Operating Instructions - Page 41
    No activity power off 1 Press to select the menu to adjust. 2 Press to select "Enable" or "Disable". Setup Signal Screensaver Input label ECO Mode settings Wobbling YUV/RGB-in select No activity power off OSD Language 1/2 Off RGB Disable English(UK) 3 Press to exit from Setup. When this
  • Panasonic TH-47LFX6 | Operating Instructions - Page 42
    ECO Mode settings Setup Signal Screensaver Input label ECO Mode settings Wobbling YUV/RGB-in select No activity power off OSD Language 1/2 Off RGB Disable English(UK) ECO Mode settings ECO Mode Custom No signal power off PC Power management DVI-D Power management Power save Disable Off Off
  • Panasonic TH-47LFX6 | Operating Instructions - Page 43
    Customizing the Input labels This function can change the label of the Input signal to be displayed. (see page 18) 1 Press to display the Setup menu. Press to select Input label. 2 Press to display the Input label screen. 3 Press to select image input. Press to change input label. Setup Signal
  • Panasonic TH-47LFX6 | Operating Instructions - Page 44
    Selecting the On-Screen Menu Language 1 Press to display the Setup menu. 2 Press to select the OSD Language. Press to select your preferred language. Selectable languages English (UK) Deutsch Français Italiano Español ENGLISH (US) ......(Chinese) .......(Japanese Russian) Setup Signal
  • Panasonic TH-47LFX6 | Operating Instructions - Page 45
    Setup for MULTI DISPLAY By lining up the Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across all screens. For this mode of operation, each display has to be set up with a Display number to determine its location. (Example) group of 4 (2 × 2) group of
  • Panasonic TH-47LFX6 | Operating Instructions - Page 46
    Setup for MULTI DISPLAY Item Location Details Select the required arrangement number. (A1-E5 : Refer to the following) Display Number locations for each arrangement. (Examples) ( 2 × 1) ( 2 × 3 ) ( 4 × 2 ) ( 4 × 4 ) ( 5 × 5 ) A1 A2 A3 A4 A5 B1 B2 B3 B4 B5 C1 C2 C3 C4 C5 D1
  • Panasonic TH-47LFX6 | Operating Instructions - Page 47
    Setup for Input Signals YUV / RGB-in select Select to match the signals from the source connected to DVI-D IN terminal. YUV signals "YUV" RGB signals "RGB" 1 Press to display the Setup menu. 2 Press to select the "YUV / RGB-in select". Press to select the desired mode. YUV RGB 3 Press to
  • Panasonic TH-47LFX6 | Operating Instructions - Page 48
    Setup for Input Signals Cinema reality* Cinema reality*: When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are recorded at 24 frames per second. If the picture is not stable, turn the setting to off. Press to select Cinema reality*.
  • Panasonic TH-47LFX6 | Operating Instructions - Page 49
    Setup for Input Signals HDMI Range Switches the dynamic range according to the input signal from HDMI terminal. Press to select "HDMI Range". Press to select "Video(16-235)", "Full(0-255)", "Auto". Signal Cinema reality HDMI Range [ Digital ] Off Auto Video(16-235): If the input signal is the
  • Panasonic TH-47LFX6 | Operating Instructions - Page 50
    clean ¿lters. Then, click "START TEST". Consult owner's manual for instructions." is displayed again a short period after cleaning the air ¿lter, contact the service provider. If "Please contact service provider." is displayed, contact the service provider. • After cleaning the air ¿lter, press to
  • Panasonic TH-47LFX6 | Operating Instructions - Page 51
    Display can be monitored or controlled via the network using equipment and application software of Crestron Electronics, Inc. This Display supports the following application software from Crestron Electronics, Inc. Ɣ RoomView® Express Ɣ Fusion RV® Ɣ RoomView® Server Edition [Crestron Connected™] is
  • Panasonic TH-47LFX6 | Operating Instructions - Page 52
    0 DHCP, IP address, Subnet mask, and Gateway settings 1 Set DHCP. When "Off" is selected, IP address and other settings can be set manually. 2 Select the item and press . 3 Enter an address. IP address I192.168. 0. 8 1 Use 2 Use to select a digit. to change a number. 3 Press . Pressing
  • Panasonic TH-47LFX6 | Operating Instructions - Page 53
    Network Setup DIGITAL LINK status Display the DIGITAL LINK connection environment. Select "DIGITAL LINK status" and press . DIGITAL LINK status LINK status HDMI status Signal quality Min Max No Link No HDMI -XX dB -YY dB LINK status HDMI status Signal quality : Either "No link", "DIGITAL LINK",
  • Panasonic TH-47LFX6 | Operating Instructions - Page 54
    Options Adjustments 1 Press to display the Setup menu. 2 Press to select "OSD Language". Press for more than 3 seconds. Options Input Search On screen display Initial input Initial VOL level Maximum VOL level Input lock Button lock Remocon User level 1/3 On Off Off 0 Off 0 Off Off
  • Panasonic TH-47LFX6 | Operating Instructions - Page 55
    Options Adjustments Item Adjustments Button lock Remocon User level Off-timer function Initial Power Mode ID select Remote ID Serial ID Studio W/B Power ON Screen Delay Off On MENU&ENTER Off: All the buttons on main unit can be used. MENU&ENTER: Locks MENU and buttons on main unit. On:
  • Panasonic TH-47LFX6 | Operating Instructions - Page 56
    OK No.4 OK No.6 SERVICE Press the FUNCTION button to exit from the menu. Power Switch Lock Sets the lock setting for the display Power switch. On: Power switch operation is disabled. Off: Power switch operation is enabled. Note: This function is only for TH-47LFX6U. Normalisation When both main
  • Panasonic TH-47LFX6 | Operating Instructions - Page 57
    LAN cable (not supplied) Hub or broadband router Notes: • Make sure the broadband router or hub supports 100BASE-TX. • Use a LAN cable that is compliant with "CAT5" or higher standards. • or a metal part of the LAN cable. • For instructions on how to connect, consult your network administrator. 49
  • Panasonic TH-47LFX6 | Operating Instructions - Page 58
    is compatible with our Digital Interface Box (ET-YFB100). For the twisted pair cable transmitter of the other maker, refer to the following URL. (http://panasonic.net/prodisplays/products/47lfx6/index.html) 50
  • Panasonic TH-47LFX6 | Operating Instructions - Page 59
    = Error is not detected, 2 = Error Not supported Parameter 11: PC IN input (PC) 31: Digital Link input (Digital Link) 32: HDMI input (HDMI) 33: DVI-D IN input (DVI) Returns empty character (no name information) Returns "Panasonic" Returns "TH-47LFX6" Returns version number Returns "1" PJLink
  • Panasonic TH-47LFX6 | Operating Instructions - Page 60
    same password used for command control and the PJLink™ security authentication. Ɣ Default user name and password are as follows: User name: user1 Password: Panasonic Ɣ The password can be changed on the Password Setup screen after logging in (see page 54). The user name cannot be changed. Ɣ Under
  • Panasonic TH-47LFX6 | Operating Instructions - Page 61
    Using Web Browser Control TOP screen structure of the Web browser control After logging in, the TOP screen of the Web browser control is displayed. Menu Menu items are displayed. When a button is clicked, setup screen of each item is displayed. Item BASIC CONTROL OPTION CONTROL NETWORK SETTING
  • Panasonic TH-47LFX6 | Operating Instructions - Page 62
    in this screen, the password used for command control and the PJLink™ security authentication is also changed. Notes: • The default password is "Panasonic". • Up to 32 alphanumeric characters can be used for a password. • When the password is changed properly, "Password has changed." message is
  • Panasonic TH-47LFX6 | Operating Instructions - Page 63
    Connected™], the Crestron Connected™ operation page is displayed. If Adobe Flash Player is not installed in your computer, or if the browser does not support Flash, this page does not appear. In this case, return to the previous page by clicking [Back] in the operation page. Operation page 1 Tools
  • Panasonic TH-47LFX6 | Operating Instructions - Page 64
    Using Web Browser Control Info page Click Info on the operation page. 1 2 3 1 Display name Displays the name of the Display. 2 Mac Address 4 Displays the MAC address. 5 3 Resolution Displays the resolution of the Display. 4 Power Status Displays the status of the power. 5 Source 6
  • Panasonic TH-47LFX6 | Operating Instructions - Page 65
    Troubleshooting Before you call for service, determine the symptoms and make a few simple checks of the front, top and rear panels has risen, these temperature rises will not pose any problems in terms of performance or quality. Power automatically turns off unexpectedly. Check the settings of
  • Panasonic TH-47LFX6 | Operating Instructions - Page 66
    Troubleshooting LCD retention on the screen and the shortening of the screen's service life: It is normal and not indicative of malfunctioning. The This is a characteristic of liquid crystal panels and is not a problem. The liquid crystal panel is built with very high precision technology giving
  • Panasonic TH-47LFX6 | Operating Instructions - Page 67
    Applicable Input Signals PC signals *Mark: Applicable input signal Signal name 1 640x400@70Hz 2 640x480@60Hz 3 640x480@72Hz 4 640x480@75Hz 5 640x480@85Hz 6 800x600@56Hz 7 800x600@60Hz 8 800x600@72Hz 9 800x600@75Hz 10 800x600@85Hz 11 852x480@60Hz 12 1024x768@50Hz 13 1024x768@60Hz 14 1024x768@70Hz
  • Panasonic TH-47LFX6 | Operating Instructions - Page 68
    Shipping condition This function allows you to reset the unit to the factory setting. 1 Press to display the Setup menu. 2 Press to select "OSD Language". Press for more than 3 seconds. Setup Signal Screensaver Input label ECO Mode settings Wobbling YUV/RGB-in select No activity power off OSD
  • Panasonic TH-47LFX6 | Operating Instructions - Page 69
    PC signals Connection terminals DIGITAL LINK HDMI DVI-D IN PC IN AUDIO AUDIO SERIAL AUDIO L-R OUT Dimensions (W × H × D) Mass (weight) TH-47LFX6U 110 - 127 V AC, 50/60 Hz TH-47LFX6W 220 - 240 V AC, 50/60 Hz 370 W 0.3 W 0.5 W Outdoor mode On: 41 W Network stand-by mode: 16 W 47-inch IPS
  • Panasonic TH-47LFX6 | Operating Instructions - Page 70
    LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  • Panasonic TH-47LFX6 | Operating Instructions - Page 71
    Of¿ce : Three Panasonic Way 2F-5, Secaucus, NJ 07094 Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Ontario L4W 2T3 For TH-47LFX6W Pursuant to the directive 2004/108/EC, article 9(2) Panasonic Testing Centre Panasonic Service Europe, a division of Panasonic Marketing Europe GmbH Winsbergring
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
h
TH-47LFX6U
TH-47LFX6W
Operating Instructions (Details)
FULL HD LCD Display
Model No.
English
Please read these instructions before operating your set
and retain them for future reference.