Panasonic TH-65LFE8U Professional Display for Simple Entry-Level Digital Signage - Page 61
Button lock, Controller user level, PC auto setting, Off-timer function, Initial power mode, Display
View all Panasonic TH-65LFE8U Professional Display for Simple Entry-Level Digital Signage manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Button lock Limits operation of the buttons on the unit. [Off]: All the buttons on main unit can be used. [MENU&ENTER]: Locks and buttons. [On]: All button operations except for the power switch are disabled. Ŷ To set [Button lock] Set with the buttons on the unit. [Off]: Press for 4 times. Press for 4 times. Press for 4 times. Press . [MENU&ENTER]: Press for 4 times. Press for 4 times. Press for 4 times. Press . [On]: Press for 4 times. Press for 4 times. Press for 4 times. Press . Controller user level Limits operation of the buttons on the remote control. [Off]: You can use all of the buttons on the remote control. [User1]: You can only use standby (ON/OFF) button, , , , and buttons on the remote control. [User2]: You can only use standby (ON/OFF) button on the remote control. [User3]: Locks all the buttons on the remote control. PC auto setting Sets the operational mode of the automatic position adjustment in the [Position] menu. [Off]: Automatic position adjustment starts when is pressed on the remote control or automatic position adjustment is executed from the [Position] menu. [On]: Other than remote control or menu operation, automatic position adjustment starts: When the display power is turned ON. When the input signal is switched. Off-timer function Enables / disables Off timer function. [Enable]: Enables the [Off-timer function]. [Disable]: Disables the [Off-timer function]. Note Ɣ When [Disable] is set, the Off-timer is cancelled. Initial power mode Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again. [Normal]: Power returns in as the same state as before the power interruption. [Standby]: Power returns in standby mode. (Power Indicator: red/orange) [On]: Power returns in power On. (Power Indicator: green) Note Ɣ When using multiple displays, [Standby] is preferred to be set in order to reduce a power load. Display ID Sets ID number when controlling the Display with [Controller ID function] and [Serial ID function]. 0 - 100 (Standard value: 0) Controller ID function Enables/Disables the ID remote control function. [Off]: [On]: Disables the ID remote control function. (Can be operated as normal remote control.) Enables the ID remote control function. Effective on switching to [On]. Note Ɣ To use the ID remote control function, setting ID numbers both for the remote control and for the display unit is required. For ID number setting for the remote control and display unit, see page 73 and [Display ID] respectively. English 61