Panasonic TH32LRU20 TH32LRU20 User Guide - Page 33
FAQs, etc., Input signal that can be displayed, PC Input Terminals Connection
UPC - 885170003996
View all Panasonic TH32LRU20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Input signal that can be displayed * Mark: Applicable input signal for Component (Y, PB, PR), HDMI and PC horizontal frequency (kHz) vertical frequency (Hz) COMPONENT HDMI PC 525 (480) / 60i 525 (480) /60p 750 (720) /60p 15.73 31.47 45.00 59.94 59.94 59.94 * * * * * * 1,125 (1,080) /60i 33.75 59.94 * * 1,125 (1,080)/60p 67.43 59.94 * 1,125 (1,080)/60p 67.50 60.00 * 1,125(1,080)/24p 26.97 23.98 * 1,125(1,080)/24p 27.00 24.00 * 640 × 400 @70 31.47 70.08 * 640 × 480 @60 31.47 59.94 * Macintosh13" (640 × 480) 35.00 66.67 * 640 × 480 @75 37.50 75.00 * 852 × 480 @60 31.44 59.89 * 800 × 600 @60 37.88 60.32 * 800 × 600 @75 46.88 75.00 * 800 × 600 @85 53.67 85.08 * Macintosh16" (832 × 624) 49.73 74.55 * 1,024 × 768 @60 48.36 60.00 * 1,024 × 768 @70 56.48 70.07 * 1,024 × 768 @75 60.02 75.03 * 1,024 × 768 @85 68.68 85.00 * Macintosh 21" (1,152 × 870) 68.68 75.06 * 1,280 × 768 @60 47.78 59.87 * 1,280 × 1,024 @60 63.98 60.02 * 1,366 × 768 @60 48.39 60.04 * Note Signals other than above may not be displayed properly. The above signals are reformatted for optimal viewing on your display. PC Input Terminals Connection Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.) Some PC models cannot be connected to the set. There is no need to use an adapter for computers with IBM PC/AT compatible D-sub 15P terminal. The maximum resolution: 1,280 × 1,024 If the display resolution exceeds these maximums, it may not be possible to show fine detail with sufficient clarity. Signal Names for D-sub 15P Connector 11 12 13 14 15 6 7 8 9 10 12345 Pin Layout for PC Input Terminal Pin No. Signal Name R G B NC (not connected) GND (Ground) Pin No. Signal Name GND (Ground) GND (Ground) GND (Ground) NC (not connected) GND (Ground) Pin No. Signal Name NC (not connected) NC HD/SYNC VD NC Technical Information FAQs, etc. 33